[AT] tractor truck

[Larry Mason]

Caps are usually fairly easy to remove (4 C-clamps or bolts). Could you 
remove bolts and lift the cap the 2" you need to remove the trunk?

-----Original Message----- 
From: Richard Fink Sr
Sent: Sunday, February 22, 2015 5:42 PM
To: Antique tractor email discussion group
Subject: Re: [AT] tractor truck

Gene the thing is i can,t get to that panel. The old trunk is just in
side of bed with cap over it need 2 in more to get it out.
R Fink
PA


On 2/22/2015 9:21 PM, Gene Dotson wrote:
>      my 91 Ford had a panel on the inside of the tailgate that allowed 
> access
> to the release mechanism and linkage. Was able to get in that way and
> release the latches. After that I routinely removed the panel and oiled 
> the
> linkage. center and outer latches.
>
>                  Gene
>
>
>
>
> -----Original Message-----
> From: Richard Fink Sr
> Sent: Sunday, February 22, 2015 1:26 PM
> To: antique tractor email discussion group
> Subject: [AT] tractor truck
>
> I have a 99 ford truck have some items in bed,problem my brother in law
> and grand son loaded a old restored trunk in the back when i went to
> open end gate to get out. Handel won,t release end gate, with cap on
> can,t get it out or get in bed. Any ideas how to get gate open so i can
> get to inside on it. I think the little plastic clips broke any and all
> reply's helpful. Truck is in almost prefect condition so don,t want to
> get drastic after it.
> Thanks
> R Fink
> PA
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at