[AT] On topic, Back to Tractors

Mogrits mogrits at gmail.com
Fri Feb 6 16:33:50 PST 2015


I like how Northern Tool paired that heater with a 5 gallon kerosene can.
According to the fuel burn rate, it uses one of those every 20 minutes!

Warren

On Fri, Feb 6, 2015 at 6:14 PM, Steve W. <swilliams268 at frontier.com> wrote:

> Indiana Robinson wrote:
> > My shop is basically un-heatable. It can be pretty comfortable in hot
> > weather. In cold weather you couldn't get it warm if you sat it on
> fire...
> > Even when we get a warm day or two the shop stays really cold. Some of it
> > may be my thinner blood I guess. I used to go out in the mornings and
> open
> > the doors to let the cold out. I hope to make some major improvements in
> > making it heatable.
> > I have ran a couple of battery chargers on some stuff, moving them from
> one
> > thing to another. I also picked up a couple of float chargers from Rural
> > King to help keep some up.
> > Why yes, I am ready for spring...
> > :-)
> >
>
> I know where you can get a heater that would heat that shop right up.
>
> http://www.masterheaters.com/kero/b600.html
>
> 600,000 BTU Kero Salamander. Saw one in a store, it's the size of a jet
> engine sitting on a 40 gallon tank!
>
> If that one isn't enough
> http://www.northerntool.com/shop/tools/product_200596883_200596883
>
> 1,760,000 BTU
>
> Just be sure you have a refinery to tap into!!!!!!!!
>
> --
> Steve W.
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>



More information about the AT mailing list