[AT] "just about worn out"

Herb Metz metz-h.b at comcast.net
Tue Feb 3 21:18:27 PST 2015


The hand throttle on our 1938 CC Case was similar to the Farmall  M or H 
series, except a friction control; which was a bear to adjust, either too 
tight to move or too loose and it changed adjust and the engine speed 
dropped.  We replaced that with the  Farmall throttle control and that 
worked served well. Herb(GA)


-----Original Message----- 
From: jtchall at nc.rr.com
Sent: Tuesday, February 03, 2015 9:23 PM
To: Antique tractor email discussion group ; farmall
Subject: [AT] "just about worn out"

Installed a set of generator brushes in dad’s Farmall M this afternoon. He 
told me to take a look at the throttle and see what was worn so that it 
would no longer stay in the last notch (wide open). Figured it just needed a 
little welding and filing. When I went to unhook the rod from the throttle 
lever, I came to realize just how many hours this poor tractor has. The rod 
had worn over halfway through in the area the cotter pin goes. It was 
surprising the cotter pin hadn’t just fallen out. I took it off to show him, 
all he could say was “I reckon that’s just about worn out.”  Certainly the 
understatement of the day, guess I’ll be welding the rod up too!
John Hall




More information about the AT mailing list