[AT] JD 216

[R Fink Sr]

   Thanks to all for the reply's. I will change condenser first then try
   coil. have done all the ones about crud and vents have not tried float
   level yet it will be last.
   Thanks
   R Fink
   PA


   On 09/22/14, Dennis Johnson<moscowengnr at yahoo.com> wrote:

   One thing to check is valve clearance. Many of these smaller engines
   wear valves and when they heat up valves do not totally close so you
   loose compression. Do not recall exact clearances but guessing 0.015
   intake and 0.022 exhaust
   Good engines have adjusters. Cheap engines adjust be removing valves
   and grinding valve stems to shorten them a little.
   Good luck
   Dennis
   Sent from my iPhone
   _______________________________________________
   AT mailing list
   [1]http://www.antique-tractor.com/mailman/listinfo/at

References

   1. http://www.antique-tractor.com/mailman/listinfo/at