[AT] Disk Plow or One-Way Plow

charlie hill charliehill at embarqmail.com
Fri Sep 5 02:38:15 PDT 2014


You could try parking the front end of one of
your other tractors in the weight box.  That might do the trick.
Just messing with you.  Good luck.  Do you happen to know
anyone with a dozer and a root rake?  Probably something you
don't often see in OK.

Charlie

-----Original Message----- 
From: Cecil R Bearden
Sent: Thursday, September 04, 2014 11:54 PM
To: Antique tractor email discussion group
Subject: Re: [AT] Disk Plow or One-Way Plow

I put an elevator counterweight on it and It still needs more.  It cuts
about 3 inches.  I broke the original bolts on the left hitch draw pin
bracket.   I quit it was dark anyhow.  I spent about an hour trying to
get it adjusted. Spent the entire day getting it ready to run.  Tail
wheel was rusted in bearings.   Bearings in main shaft seem to be ok.
Had to move draw pin on right side up to accommodate the bigger lift
arms of the NH..  I figured I can adjust the lift arms to make the
difference.  Makes a lot of difference on the length of the top link..
   It is certainly a great way to turn fuel into dust!!!!

Cecil in OKla


On 9/4/2014 7:30 AM, charlie hill wrote:
> Cecil, how much weight do you think you'll have to
> put on it to get it in the ground?
>
> Charlie
>
> -----Original Message-----
> From: Cecil R Bearden
> Sent: Thursday, September 04, 2014 8:03 AM
> To: Antique tractor email discussion group
> Subject: Re: [AT] Disk Plow or One-Way Plow
>
> I found a mounted One-way plow yesterday.  I also found the original
> brochures, I think!!  It is a P8 or F8 plow.
> A couple of links to the brochures are below.
>
> http://www.ebay.com/itm/Vintage-Brochure-P-8-INDEPENDENT-Mounted-ONE-WAY-DISC-PLOW-/141390973797?pt=LH_DefaultDomain_0&hash=item20eb8f0b65
> http://www.ntractorclub.com/forums/manuals/messages/5264.html
>
> I just hope the bearings hold together for 30 acres.   With my 100 hp NH
> tractor, I would bet that I can plow more than 2 1/2 acres per hour.  It
> will be slow, but if it does the job, that is all that matters...
>
> Cecil in OKla
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at 




More information about the AT mailing list