[AT] LED lights

Steve W. swilliams268 at frontier.com
Thu Nov 13 01:21:41 PST 2014


Dan Glass wrote:
> I will look again even though I do like the cfl's.  In my shop over 
> different pieces of equipment I put a bar with four of the 100 watt 
> equivalent and it puts out 400 watt equivalent and only draws 100 
> watts.  I like lots of light.
> On 11/12/2014 6:07 PM, Steve W. wrote:
>> Dan Glass wrote:
>>> I looked at Lowe's this morning at leds and not only are they $20 for an
>>> 100w equivalent they color temperature is no higher than 3000 degrees.
>>> I use CFL's now that are 5000 degrees and the light is much more
>>> pleasant and easier for me to see with and I can evaluate colors better
>>> with them.  I buy the CFL's are Walmart for about $3 each and the life
>>> is about 9 years.  Until they can raise the color temperature on led's I
>>> am not going to get them even if they are giving them away and use no
>>> electricity at all.
>> Look closer. Lowes sells 4 different color temps in the LED bulbs.
>> I bought some 5000s at the local one yesterday.
>>
>> Pay attention to the packaging as it is the only thing that shows the
>> color temp. On most the colors and labels are the same, just the color
>> temps and equivalent wattages are printed different.
>>
>> And you can generally save money if you buy the non-dimmable bulbs. Here
>> the difference is 3-4 dollars a bulb. If you don't need a dimming light
>> why pay extra?
>>
> 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
> 

Same here. Light is a great thing, especially when you're working with 
surface mount components or carburetors (diverse interests)

Over my main bench I started with older track lights, adapted those to 
the smaller halogen lamps, then to CFL and now LED. The LEDs win hands 
down.

Between the shop and the house I replaced around 30 bulbs so far. Have 
to replace the 4' fluorescents yet.

1640 watts of incandescents in the house =  115 watts in the LEDs !

One thing I haven't tried yet is to see if the LEDs change the color 
balance on film.


Only odd thing that I heard from a friend in Texas. He owns a HUGE old 
house. The tree huggers keep screaming about conserving power so he has 
been gradually upgrading things to decrease his power/fuel usage. He 
upgraded the insulation in places, replaced a lot of the old appliances 
and heating gear. He just finished up changing to all CFL lamps 
(prepping for LED as the CFLs fail).

He got his recent electric bill and discovered that he was hit with a 
"Minimum Usage" surcharge. Called them and was told that due to all the 
updates he is no longer using enough electric to avoid the surcharge !!!!!!


-- 
Steve W.



More information about the AT mailing list