[AT] Flat Belt Implements 101-UPDATE

[Al Jones]

I scored a flat, endless belt for my #6 on ebay this weekend.  As soon as it gets here, I will be able to try belting it up and see how it works....

Al


-----Original Message-----
>From: Mike <meulenms at gmx.com>
>Sent: Oct 4, 2013 11:24 AM
>To: Antique tractor email discussion group <at at lists.antique-tractor.com>
>Subject: Re: [AT] Flat Belt Implements 101
>
>The only one I've dealt with in North Carolina would be Splawn Belting 
>in Burlington, NC. If you find a belt on Ebay, they should be able to 
>put and endless splice in it.  Mike M
>On 10/4/2013 9:16 AM, Al Jones wrote:
>> Mike, I'm in eastern NC.
>>
>> Thanks everyone for the input so far.  I checked out my mill and tractor. The mill is a later model 4E and has a steel pulley.  The Super A also has a steel pulley. I want to set the tractor so that the belt is pulled out behind the mill so I am not standing beside it when feeding the mill.  To do that it looks like I will have to twist the belt......
>>
>> Al
>>
>> -----Original Message-----
>>> From: Mike <meulenms at gmx.com>
>>> Sent: Oct 3, 2013 11:11 PM
>>> To: Antique tractor email discussion group <at at lists.antique-tractor.com>
>>> Subject: Re: [AT] Flat Belt Implements 101
>>>
>>> Al, where are you located?  I fabricated and sold flat belts for years
>>> before retiring, I still have a lot of contacts throughout the country.
>>> Mike M
>>>
>>>
>>> On 10/2/2013 9:41 PM, Al Jones wrote:
>>>> I recently acquired a #6 IH hammer mill in pretty good shape.
>>>>
>>>> These mills are driven by a long, flat belt. I"ve never run anything with a belt pulley before, so I"d like some input from those who have been there and done that. My plan is to demonstrate it at shows. Here"s what I "think" I know:
>>>>
>>>> 1. Long belts stay on better if they run slack
>>>>
>>>> 2. Everything has to be lined up just right.
>>>>
>>>> 3. You have to put belt dressing on the belt
>>>>
>>>> 4. It is cooler than heck watching a belt driven machine run.
>>>>
>>>> That"s about it. It looks like (I have not measured the pulley) I need a 6" wide belt. Looks like there are plenty of different lengths on Ebay. How long a belt should I look for? Basically, I need a "belts for dummies" lesson.
>>>>
>>>> I plan on running it with a smaller tractor like a Farmall Super A. (I don"t plan to crowd it too much) Does the size tractor I use help determine the length/type of belt?
>>>>
>>>> Any help appreciated...
>>>>
>>>>
>>>>
>>>> Al
>>>>
>>>> _______________________________________________
>>>> AT mailing list
>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>>
>>> _______________________________________________
>>> AT mailing list
>>> http://www.antique-tractor.com/mailman/listinfo/at
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at