[AT] Tractor Shop weatherproofing

charlie hill charliehill at embarqmail.com
Sat Nov 23 13:03:30 PST 2013


LOL,  no not really.  Pipe insulation wasn't dense enough to do
what I needed and I just kind of stumbled on those things in
Wally World or somewhere and said "hey this might work" and it did.
They actually can't be seen in my application until I take the hatch
cover off.

Charlie

-----Original Message----- 
From: Richard Fink Sr
Sent: Saturday, November 23, 2013 3:04 PM
To: Antique tractor email discussion group
Subject: Re: [AT] Tractor Shop weatherproofing

Charlie you just used them because they were prearty than pipe insulation.
R Fink
PA
----- Original Message ----- 
From: "charlie hill" <charliehill at embarqmail.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Saturday, November 23, 2013 9:57 AM
Subject: Re: [AT] Tractor Shop weatherproofing


> Richard,  now that you mention that,  a few years ago I had
> to seal a hatch on a big industrial dust collector.  What I found
> and used that was cheap and effective was those foam "noodles"
> that kids play with in the swimming pool.  They are denser than
> pipe insulation but made about the same way and are pretty cheap.
> they also come in colors.
>
> Charlie
>
> -----Original Message----- 
> From: Richard Fink Sr
> Sent: Saturday, November 23, 2013 7:30 AM
> To: Antique tractor email discussion group
> Subject: Re: [AT] Tractor Shop weatherproofing
>
> Andy a cheap fix i have found is get pipe insulation[what ever size you
> need] open it up and staple it to door or frame. Don,t last years but seal
> good as door opens or closes.
> R Fink
> PA
>
> ----- Original Message ----- 
> From: "Andy Glines" <andyglines at hotmail.com>
> To: "atis" <at at lists.antique-tractor.com>
> Sent: Friday, November 22, 2013 2:20 PM
> Subject: [AT] Tractor Shop weatherproofing
>
>
>> My shop building is a 48X30 pole barn with a wood stove for heat.  I
>> don't
>> even bother to try working on windy winter days because the stove can't
>> warm up the space.  I'm working on sealing up the building better to keep
>> the wind out.  The main problem is the sliding door on the north side of
>> the building.  Around here, the wind comes from the N-NW in the winter
>> directly against the door.  I'm looking for a way to seal the top of the
>> door without interfering with it operation.  I'm thinking that the
>> trimused around overhead doors could work good for this.  It is made from
>> ridged vinyl about 2" wide with a 3/4" flexible seal that touches the
>> door.  What works for you?
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at 




More information about the AT mailing list