[AT] John Deere 1010

Mike meulenms at gmx.com
Wed May 15 10:41:32 PDT 2013


Bruce, could you send the pictures to me please? I'm glad it was a 
straight forward fix.  Thanks, Mike

meulenms at gmx.com

On 5/15/2013 12:18 PM, Bruce Fallon wrote:
> I split the tractor yesterday and found the hub which drives the splined
> sleeve which was mounted to the pressure plate by 3 rivets was no longer
> mounted. The rivets had come loose and eventually sheared off. New Auburn
> pressure plate from JD is $312.  I used 3 grade 8 bolts and remounted it and
> also put some small weld beads on it.  Splines are a little worn but I don't
> believe it will give me any problem. If it had been a JD shop repair I am
> sure they would want a new clutch, pressure plate, throw-out bearing,
> splined drive sleeve, plus labor probably would have been $2000 to $3000 or
> more for the repair. If anyone is interested in pictures reply to me and I
> can send some.  I don't have a posting sited to post them.
> Spencer is there a way to reestablish the image depot on the ATIS site?
>
> Bruce Fallon
> Langley, WA 98260
>
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Ralph Goff
> Sent: Tuesday, May 14, 2013 9:01 PM
> To: Antique tractor email discussion group
> Subject: Re: [AT] John Deere 1010
>
> On 5/13/2013 10:07 PM, Bruce Fallon wrote:
>> I have a  1010 RS Serial 15047 which I was using to Rototill using a 5ft
> PTO
>> tiller. I was just finishing when the PTO and the hydraulics quit.
> There must be some real JD guys that know the answer to this. I am not
> too familiar with them but do recall that some of that series or maybe
> the 20 series had a disconnect lever on the side for the pto and hyd.
> Maybe for easier starting? Just something that sticks in my mind from
> long ago. I'd inquire over in the JD section of Yesterdays Tractors.
>
> Ralph in Sask.
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.3336 / Virus Database: 3162/6313 - Release Date: 05/10/13
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>




More information about the AT mailing list