[AT] Moline Universal Tractor Manual.

John B rustyacres at yahoo.com
Wed Mar 20 05:49:47 PDT 2013


The Moline Universal is an early tractor from the teens. It did not use a Marvel-Schebler carburetor.

John Boehm
Woodland, CA
Visit my web site at http://vintagetractors.com



--- On Wed, 3/20/13, charlie hill <charliehill at embarqmail.com> wrote:

From: charlie hill <charliehill at embarqmail.com>
Subject: Re: [AT] Moline Universal Tractor Manual.
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Date: Wednesday, March 20, 2013, 3:46 AM

Barry if you carb is a M-S brand as Joe's message indicates
you should find a brass tag on it somewhere with a number similar
to the ones Joe listed.   You will need that number.   If you don't find
a tag on it look for the number to be punched or scribed into the outer 
surface of
the carb somewhere.

Charlie
-----Original Message----- 
From: Barry & Tanya Stait
Sent: Wednesday, March 20, 2013 1:42 AM
To: Antique tractor email discussion group
Subject: Re: [AT] Moline Universal Tractor Manual.

Hi Joe. Thank you for looking. My fathers tractor is a Moline Universal D
model and the carb is round in shape two sections. The bottom section is the
wick that is keep alight by the magneto. The top section has the float and a
type of jet. There is only one mixture screw which is on top in the middle
of the carb.
Barry.
----- Original Message ----- 
From: <joehardy at epix.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, March 20, 2013 12:46 PM
Subject: Re: [AT] Moline Universal Tractor Manual.


> Hi Barry; What model Carb do you have? Following info is for models:
> TSX633, TSX650; TSX713; TSX714; TSX878. Recommended float setting is 1/4
> inch when measured from nearest face of float to gasket on carb
> body.Suggested initial adjustment both low & high speed mixture
> adjustments needles is 1-3/4 to 2 turns open from closed position. First,
> readjust high speed mixture needle for ok performance under load and
> engine is warm. Then readjust low speed mixture needle for slow speed
> operation. I have an I&T shop service manual for most MM tractors so if
> your carb is something different, let me know. I'm in process of
> rebuilding a MM335 for the past year and a half and my wife wants it out
> behind of our house ASAP. Spring is coming (I hope) in NE Pennsylvania so
> gotta get it running soon. Joe Hardisky  Ryman Farm Dallas, PA
> ----- Original Message -----
> From: "Barry & Tanya Stait" <bst41474 at bigpond.net.au>
> To: "Antique tractor email discussion group"
> <at at lists.antique-tractor.com>
> Sent: Tuesday, March 19, 2013 1:55:57 AM
> Subject: [AT] Moline Universal Tractor Manual.
>
> Hi all, just wondering if any would happen to have a copy of a owners
> manual or a repair manual for a Moline Universal tractor and would be able
> to copy and email the section on adjusting the carb to me.
> My father has a Moline and I can not get it to idle.
> Thank you. all in advance.
> Barry Stait.
> Barry & Tanya Stait.
> Mudgee. NSW. Aust.
> bst41474 at bigpond.net.au
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2904 / Virus Database: 2641/6187 - Release Date: 03/18/13
>

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at 

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at



More information about the AT mailing list