[Steam-engine] Nobody here..........

[James Mackessy]

Hi Mike;
      What size cylinder does that have? I have an 1884 Bigelow that 
came out of a cannery, 8" x 12"
cylinder, 12 or 15 hp depending on how fast you run it, (125 vs 150 
RPM), at least that's what the
catalog says.
Jim Mackessy



On 3/1/2013 8:50 PM, Mike Rock wrote:
> I'm still here with my 20hp Farquahr!  Need a boiler, either vertical or
> horizontal.  This engine came out of the canning factory in York, PA.
>
> Mike
> SW Wisconsin
>
> On 3/1/2013 7:26 PM, JEFF LUND wrote:
>> I also wanted to see who still subscribed here.
>>
>>
>>
>> ________________________________
>>    From: Jeff Smith <steamenginesmitty at yahoo.com>
>> To: Steam-engine mailing list <steam-engine at lists.stationary-engine.com>
>> Sent: Friday, March 1, 2013 5:58 PM
>> Subject: [Steam-engine] Nobody here..........
>>
>> Most of us are over at Harry's.........as you well know since you stir the pot there also.....  :)
>>
>>
>>
>> ________________________________
>> From: JEFF LUND <lundmachineworks at yahoo.com>
>> To: "steam-engine at lists.stationary-engine.com" <steam-engine at lists.stationary-engine.com>
>> Sent: Friday, March 1, 2013 9:11 AM
>> Subject: [Steam-engine] (no subject)
>>
>> Anybody out there?
>> _______________________________________________
>> Steam-engine mailing list
>> http://www.stationary-engine.com/mailman/listinfo/steam-engine
>> _______________________________________________
>> Steam-engine mailing list
>> http://www.stationary-engine.com/mailman/listinfo/steam-engine
>> _______________________________________________
>> Steam-engine mailing list
>> http://www.stationary-engine.com/mailman/listinfo/steam-engine
>>
> _______________________________________________
> Steam-engine mailing list
> http://www.stationary-engine.com/mailman/listinfo/steam-engine
>