[AT] Ford 4000 Quitting Afer Running a While
Dave Rotigel
rotigel at me.com
Sun Jul 14 12:42:13 PDT 2013
Yup, You could take 27 hours checking out ALL the necessary parts, or you could spend $100.00 and an hour of labor and get the same results. If your time is only worth $3-$4 dollars an hour, GO FOR IT!
Dave
PS, For $100, I wouldn't give a darn what fixed it as long as it was cutting the grass once more!
On Jul 14, 2013, at 3:15 PM, Tom wrote:
> The traditional garage money-making way?
> Then you're still left not knowing which fixed the problem...
> To me, it sounds like the coil, coils can simulate a fuel problem then
> when cool work again; points are either good or bad; condensers are the
> most maligned component in a coil setup, but minimal labour to fit with
> points:- get replaced due to belts & braces (suspenders?) approaches.
>
> Tom
>
>
>
>
>
>> ________________________________
>> From: "jtchall at nc.rr.com" <jtchall at nc.rr.com>
>> To: Antique tractor email discussion group <at at lists.antique-tractor.com>
>> Sent: Sunday, 14 July 2013 11:46 PM
>> Subject: Re: [AT] Ford 4000 Quitting Afer Running a While
>>
>>
>> I'm suggesting a shotgun approach--points, coil and condenser. Mine and
>> dad's experience has been coils go out pretty quickly, as in seconds not
>> minutes, leading me to think it could be the condenser, but I'd bet on the
>> coil first. Considering the tractor is not at your house, it appears to be a
>> bit of inconvenience to work on it, that’s why I'd change it all and be done
>> with it. If all that doesn't solve the problem, I'd look into vapor locking.
>>
>> John Hall
>>
>>
>>
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>>
>>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
More information about the AT
mailing list