[AT] Water Lines

charlie hill charliehill at embarqmail.com
Fri Jan 4 06:54:44 PST 2013


There is a Tractor Supply not far from Al that has 1" 100 psi x 300' roll 
for $85.00.
I suspect someone around his place has it even cheaper than that.

Charlie

-----Original Message----- 
From: Cecil R Bearden
Sent: Friday, January 04, 2013 9:05 AM
To: Antique tractor email discussion group
Subject: Re: [AT] Water Lines

Lowe's has a lot of it at a reasonable price.  I used to buy a lot of
pipe at Pumpco Supply, I think they also had a store in Tulsa.  Locke
Supply will give a pretty god discount to the end user.  You can also
use the 1 inch 200 psi PVC glued joint.   I have pulled that pipe in a
ripped trench also.  I have 3000 ft of pipe  6 ft deep for my heat
exchanger here.  It is 2 inch 160 psi.   The black plastic pipe connects
with barbed connections and hose clamps.  Contrary to this list opinion,
I have had very good success with plastic Hose barbs.  The galvanized
ones rust.  The olastic ones I have used were the same size as schedule
40 PVC.  The new PEX pipe that used copper crimp rings is really great.
I have used it and had good success.  The 1 inch pex uses brass barbs.

If I was to build a new heat and air system, I would use a ground source
heat pump for my air conditioning and water heating, then an outdoor
boiler for heating the house, water, dryer, and stock tank heat.

Cecil in OKla


On 1/3/2013 10:58 PM, moscowengnr at yahoo.com wrote:
> The posts on water lines were really informative. I am getting ready to 
> install 500 to 600 feet of water line to connect a new cabin I am building 
> on back of property where house in front burned down with Oklahoma 
> wildfires.
>
> Where can you purchase the rolled plastic pipe that was mentioned in some 
> of the posts??
>
> Is this similar to what is used for some gas lines??
>
> Does it do joints by heating and pressing together??  if so does this work 
> well?? where do you get tools for this??
>
> This may be interesting for water lines, but I also want to try some 
> experimenting with ground heat exchangers for heat and air. Having a long 
> roll of plastic pipe would help with a few trial projects both in 
> Oklahoma, and also here in Texas for my shop here.
>
>
>
> Thanks,
>
> Dennis
>
>
>
>
>
> Sent from Windows Mail
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at 




More information about the AT mailing list