[AT] County/City Water Connection: What size meter to use?

[charlie hill]

Al, that's what I think I would do too.   As far as a private well goes, 
after the house is built and you have the certificate of occupancy
go get a point, a few joints of galvanized pump pipe and an old Ford rear 
axle and drive your own shallow well in your back yard.
A hand pump or shallow well pump with pull water about 30' if you have a 
good flow.  I promise you there is good water in your area
a lot less than 30'.  Just one precaution.  If your lot is on heavy land 
(clay) and you think it was ever in tobacco and treated with Telone C
or any of a handful of other soil treatments make sure to have the water 
tested before you use it.  There is subdivision over off of hwy 42 between
Clayton and Fuquay Varina where every well in the S/D was contaminated with 
Telone and a lot of folks got sick before it was figured out.

Charlie

-----Original Message----- 
From: Al Jones
Sent: Wednesday, January 02, 2013 8:18 PM
To: Antique tractor email discussion group
Subject: Re: [AT] County/City Water Connection: What size meter to use?

Charlie,

Based on other responses so far, I'm leaning towards the 1" line with a 3/4" 
meter.  I just can't stomach that extra money for a meter that's 1/4" 
bigger!

The whole reason I'm going with county water as opposed to a well is pure 
convenience. It seems like when a pressure switch goes bad, it's always at 
the most inconvenient time possible.  Plus, the county we are building in is 
so persnickity about things, I feel like there is just less red tape just 
hooking on.

Al


-----Original Message-----
>From: charlie hill <charliehill at embarqmail.com>
>Sent: Jan 2, 2013 6:55 PM
>To: Antique tractor email discussion group <at at lists.antique-tractor.com>
>Subject: Re: [AT] County/City Water Connection: What size meter to use?
>
>Al,  of course the 1" would be better but I'm thinking the 3/4 meter with
>the 1" line might be a good idea.
>The thing is that you are pushing the water so far and there is some degree
>of flow restriction in the pipe.
>A 1" pipe will flow approximately 75% more water at the same pressure as a
>3/4" line.  Do the 1" meter if you
>can stomach the impact fee.  If not save that 1600 and spend it on putting
>in a well of your  own (even if it's a
>shallow well) so you will have a back up water source for watering flowers
>and washing cars and in case something
>happens to the water supply from the county.
>
>We were where we are before there was county water here.  When it came
>through I didn't sign on and we are still on
>well water.  20 years more or less later I've spent maybe 100 buck on water
>pump repairs (pressure switches, and air
>volume control valves) and haven't paid a water bill yet.  The only down
>side is that there is some iron in our water that is
>not present in our county water but otherwise the water quality from the
>well is just as good.
>
>Charlie
>
>-----Original Message----- 
>From: Al Jones
>Sent: Wednesday, January 02, 2013 6:06 PM
>To: Antique tractor email discussion group
>Subject: [AT] County/City Water Connection: What size meter to use?
>
>
>WARNING: OFF TOPIC!
>
>My wife and I are building a house, and it’s time to put the water meter
>down out at the highway.  This is my first experience with “county water,”
>as I have always lived in a house on its own well.  I am hoping that the
>convenience of not maintaining a pump will be worth it in  the long run.
>Plus, we will be living in the town ETJ, and I expect “one of these days”
>they will run a municipal sewer line and we’ll have to connect anyway.
>
>I have a choice of a meter with a 3/4" hookup, pretty much the standard 
>deal
>around here, or a 1” hookup.  The 1” meter is $170 more than the 3/4" 
>meter,
>but the highway robbery, uh, I mean “impact fee” is $1600 more for the 1”
>meter.  Our house is between 800 and 900 feet from the road and where the
>meter will be.  Should I bite the bullet and go for the 1” connection or
>will a 3/4" line give acceptable pressure and flow?  My contractor suggests
>the 1” meter, and I have had others advise either one will work.  One even
>suggested just installing the 3/4" meter but run a 1" pipe to the house.
>
>We won't be doing anything fancy, just water needs for a 3 bedroom, 2.5 
>bath
>house.  No lawn irrigation other than filling up a watering can when I 
>plant
>marigolds or something.
>
>When the meter goes in, I intend to run the line to the house myself.  If
>so, I will be using the 424 IH with a middlebuster to dig the trench (if it
>will go deep enough) and the Super A with IH Fast Hitch blade to
>backfill.....
>
>
>thanks,
>Al
>
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at


_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at