[AT] Grass seeder

[robertbobmull.ga at att.net]

Good idea Herb!

Sent from my iPhone

> On Dec 29, 2013, at 11:38 AM, "Herb Metz" <metz-h.b at comcast.net> wrote:
> 
> Spencer,
> We pulled the drill onto a drag  (couple 2" x 12" planks longer than the 
> drill width and secured a foot or so apart with screws and 2" lumber), then 
> hooked a log chain to the drag and the tractor and pulled it through the 
> gate.  We also used such drag for storing combine wheat cutting platform, 
> and pushed this back into a modest shed for storing platform. Used a 2" x 8" 
> between tractor and drag for pushing back into shed. Equipment weight would 
> limit this method.   Threshing portion of 12' pull-type combine was hooked 
> to tractor and backed into same shed.
> Herb
> 
> -----Original Message----- 
> From: Spencer Yost
> Sent: Saturday, December 28, 2013 7:03 PM
> To: Antique tractor email discussion group
> Subject: [AT] Grass seeder
> Sorry for the blank message.  The send button is to close the edit area on 
> these dang iPhones!
> Anyways, I was trying to ask:   Has anyone use a brillion grass drill 
> before?    The grain drill I can rent from the county that I use for my 
> orchard grass  is too wide to fit through one of my gates so I wanted to use 
> something smaller.
> Jut curious what everyone's experience has been
> Spencer.
> 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at