[AT] New Idea 452 Mower Friction Disc?

[Tom]

Postfree. :-)

Tom





>________________________________
> From: Mike <meulenms at gmx.com>
>To: Antique tractor email discussion group <at at lists.antique-tractor.com> 
>Sent: Tuesday, 20 August 2013 1:50 PM
>Subject: Re: [AT] New Idea 452 Mower Friction Disc?
> 
>
>Did you look at the agcopartsbook.com website to look for your cutter? 
>Size is listed as 3-1/2" ID x 5-3/4" OD if its the same machine. Tom 
>offered to machine a couple to size and send them to you for the cost of 
>postage, if I read correctly, hard to beat that if 1/8" thickness will 
>work..
>
>
>3-1/2" ID x 5/34" OD
>
>On 8/19/2013 7:20 PM, William Powell wrote:
>> Sent a note to the Chesson's, this is the quick response I received:
>>
>> "We are not a New Ideal dealer so I do not have the size for the friction
>> discs on this cutter."
>>
>> Still researching the other suggestions.
>>
>> Thanks.
>>
>>
>> Regards,
>>
>> Will
>>  
>> -----Original Message-----
>> From: at-bounces at lists.antique-tractor.com
>> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of charlie hill
>> Sent: Saturday, August 17, 2013 9:40 PM
>> To: Antique tractor email discussion group
>> Subject: Re: [AT] New Idea 452 Mower Friction Disc?
>>
>> Mike,  sometime next week do a google search for Mark Chesson and son's
>> equipment in Williamston NC.
>> Look for an 800 number.  They have one.  They are now New Holland dealers
>> but were AC dealers for
>> 30 years or more.  The same people run it now.  It's a family shop.   Ask
>> for parts.   The parts dept. will
>> probably answer the phone.  (the guy has a kind of high pitched voice.
>> don't do like I did last time and address him as a woman.  he didn't say
>> anything but I could tell it cut him to the
>> bone)  Anyway, ask him about the part.
>> If it's out there he'll probably know where to send you.  If that doesn't
>> work go to the AllisChalmers.com site I mentioned earlier and go to the
>> appropriate discussion group and ask.
>>
>> Charlie
>>
>> -----Original Message-----
>> From: Mike
>> Sent: Saturday, August 17, 2013 2:16 PM
>> To: Antique tractor email discussion group
>> Subject: Re: [AT] New Idea 452 Mower Friction Disc?
>>
>> I agree Charlie, the fact that "all knowing" Google didn't pull up anything
>> on that part is a good sign it's probably not available anymore.  Mike M On
>> 8/17/2013 11:29 AM, charlie hill wrote:
>>> I know a shop here that works on heavy duty trucks.  He re-lines brake
>>> shoes himself so I know that friction material is available at least
>>> at that level.  The factory piece is better if it's available but if
>>> not a shop that rebuilds clutches and brakes will have something that
>>> works most likely.
>>>
>>> -----Original Message-----
>>> From: Mike
>>> Sent: Saturday, August 17, 2013 11:10 AM
>>> To: Antique tractor email discussion group
>>> Subject: Re: [AT] New Idea 452 Mower Friction Disc?
>>>
>>> They were bought out by AGCO John. Will, go to www.agcopartsbook.com
>>> and enter as a guest. You will be able to drill down by make and model
>>> number to your mower. Then I'd find and AGCO dealer and give them a try.
>>> This is what I found when I tried it. Part number K3121 2 Clutch
>>> facing 3-1/2" ID x 5/34" OD, thickness wasn't listed
>>>
>>> Mike M
>>>
>>>
>>>
>>>
>>> On 8/17/2013 6:59 AM, jtchall at nc.rr.com wrote:
>>>> Weren't they bought up by AGCO? May still be parts available there,
>>>> probably can get to a parts manual through their website.
>>>>
>>>> John Hall
>>>>
>>>> -----Original Message-----
>>>> From: William Powell
>>>> Sent: Friday, August 16, 2013 10:24 PM
>>>> To: 'Antique tractor email discussion group'
>>>> Subject: [AT] New Idea 452 Mower Friction Disc?
>>>>
>>>> Hello,
>>>>
>>>> I picked up and old 452 New Idea Mower.
>>>>
>>>>
>>>> The friction disc(s) is worn out.
>>>>
>>>> Where can I get a disc? If they are no longer available is there a
>>>> source for material to fabricate a disc?
>>>>
>>>> Thanks,
>>>>
>>>> Will
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> AT mailing list
>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>>
>>>>
>>>> _______________________________________________
>>>> AT mailing list
>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>>
>>> _______________________________________________
>>> AT mailing list
>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>
>>> _______________________________________________
>>> AT mailing list
>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at
>
>
>