[AT] New Idea 452 Mower Friction Disc?

[charlie hill]

I know a shop here that works on heavy duty trucks.  He re-lines brake shoes 
himself
so I know that friction material is available at least at that level.  The 
factory piece is
better if it's available but if not a shop that rebuilds clutches and brakes 
will have something that
works most likely.

-----Original Message----- 
From: Mike
Sent: Saturday, August 17, 2013 11:10 AM
To: Antique tractor email discussion group
Subject: Re: [AT] New Idea 452 Mower Friction Disc?

They were bought out by AGCO John. Will, go to www.agcopartsbook.com and
enter as a guest. You will be able to drill down by make and model
number to your mower. Then I'd find and AGCO dealer and give them a try.
This is what I found when I tried it. Part number K3121 2 Clutch facing
3-1/2" ID x 5/34" OD, thickness wasn't listed

Mike M




On 8/17/2013 6:59 AM, jtchall at nc.rr.com wrote:
> Weren't they bought up by AGCO? May still be parts available there, 
> probably
> can get to a parts manual through their website.
>
> John Hall
>
> -----Original Message-----
> From: William Powell
> Sent: Friday, August 16, 2013 10:24 PM
> To: 'Antique tractor email discussion group'
> Subject: [AT] New Idea 452 Mower Friction Disc?
>
> Hello,
>
> I picked up and old 452 New Idea Mower.
>
>
> The friction disc(s) is worn out.
>
> Where can I get a disc? If they are no longer available is there a source
> for material to fabricate a disc?
>
> Thanks,
>
> Will
>
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at