[AT] Zenith float setting

[jtchall at nc.rr.com]

Unless something has been damaged we never check them either. But since this 
one is about to come apart for the 4th time, it may be time to see if it is 
adjusted correctly. It wasn't leaking/flooding to begin with, just full of 
crap. Had to soak out the carb and clean the tank out and install an inline 
filter. Put in the a new kit and now it's leaking. I told dad I'd take a 
look Mon. to see if I can spot what is going wrong. Possibly something with 
the new parts.

John


-----Original Message----- 
From: Cecil R Bearden
Sent: Saturday, April 06, 2013 8:35 PM
To: Antique tractor email discussion group
Subject: Re: [AT] Zenith float setting

Bo:
You tool the words right out of my mouth.....

Cecil in OKla


On 4/6/2013 5:45 PM, Bo Hinch wrote:
> I never use a gauge , with float resting on needle valve , set the float
> level with carb. top . When it is flipped over the correct way , I make
> sure needle doesn`t hang up when pushing float up to the shutoff position 
> .
>
> Bo Hinch
>
>
> On Sat, Apr 6, 2013 at 4:44 PM, <jtchall at nc.rr.com> wrote:
>
>> Anyone know the float height setting on a Zenith 12613A carb on a Farmall
>> 100?
>>
>> Thanks,
>> John Hall
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at