[AT] Quick note about cultivating issue, a thank you

[Chuck Bealke]

On 4/11/2013 10:57 AM, Grant Brians wrote:
> I wanted to thank those on both the farmall and ATIS lists for their help on
> my Farmall 100 cultivating issue. We did solve it with reference to the
> comments I got. The fix was ridiculously simple and I feel a little
> embarassed for not IMMEDIATELY seeing the reason for the problem. The four
> bolts that hold the mounting square shaft to the bolster had loosened over
> the nearly 60 years and with all of our use the shaft had slipped rightward.
> But in our defence, the square shaft also had worn in an odd pattern on the
> end and was deceptively "damaged" as a result.
>       I now have a much better understanding of how IH did things and feel I
> can in the future solve these problems on my own. Thanks to all who offered
> assistance and info.
>       I still need to get two Farmall 100s rebuilt including possibly a new
> block, sigh. The issue is TIME!
>             Grant
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
Grant,

Thank YOU for taking precious time from your full life to share your 
events and considerable wisdom with us. Your last email this morning on 
the harvesting trip was typically mighty fine.  I read every word you 
post and have long learned and enjoyed - often greatly - from the 
experience.

Chuck Bealke