[Farmall] M&W pump
Kevin Bish
krsky at windstream.net
Wed Sep 5 03:54:31 PDT 2012
Carl,
no we don't have any instructions for the pump installation either. The pump
doesn't have to be timed, but you have to time the distributor to the
engine, as you already know. Bring number one cylinder up on top dead
center, and then the rotor inside the distributor should point to the number
#1 spark plug tower, on the cap, when you install it. I don't know about the
triangular bracket to support the pump. If you find any information about
that, let me know.
I still haven't found any information about parts for the M&W pumps. I just
sold one to a friend, and when he put it on, the pump was leaking back
through into the distributor housing. He took it back off, and we had a shop
check it out. They just called me last night, and told me there isn't
anything any good inside the pump. I gave him a Behlen live hydraulic pump
to use for now, but I'm not sure what I'm going to do about the other M&W
pump, if I can't get parts for it anywhere. I am a new and used tractor
parts dealer,and Farmall parts salvage yard, but can't find anything about
parts for these pumps?
Kevin.
----- Original Message -----
From: <szabelsk at gdls.com>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Tuesday, September 04, 2012 8:04 AM
Subject: Re: [Farmall] M&W pump
> Kevin,
>
> Don't have an answer to your question, however I'm wondering if your
> friend has any installation instructions for installing the pump. I
> recently purchased one for my H, and was going to wing it using basic
> knowledge and the H manuals I have to make sure the timing got set right.
> The one I have is the type that comes with a distributor that points
> upward when installed, not the one that gets installed between the
> existing distributor and the timing gear. My biggest question is a
> triangular bracket that came with the pump that I believe is to support
> the pump when installed. I can't see how it attaches to anything, not even
> the pump.
>
> Carl Szabelski
>
> The Borg Are Wrong, Resistance Is Not Futile ..... It's Voltage / Current
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
More information about the AT
mailing list