[Farmall] M&W pump

[richard nono]

emersons  salvage in  my home town  has new and used parts for all farmall's
there phone # is 870-528-3213
they will ship too you also  
i dont know if they have a web site but you can call them and ask there 
they are always  fair on there price's 
good luck
richard  wheeless


>________________________________
> From: Mark Sargent <bucksargent at embarqmail.com>
>To: 'Farmall/IHC mailing list' <farmall at lists.antique-tractor.com> 
>Sent: Sunday, September 2, 2012 6:21 PM
>Subject: Re: [Farmall] M&W pump
>  
>Kevin  
>I went out to the barn-- The kit I got--- was to rebuild the Behlen Power
>Steering unit -- not the M& W Pump.   I have had the pump off a couple time
>in the past but never have rebuilt it.    The Place I ordered  the kit  for
>the Behlen unit from was-- "HI-LO Equipment Company of Columbus", Columbus,
>Nebraska 68601.   The Phone was 402-564-3415. 
>They may be able to help-- if someone here or Yesterday's Tractors can't.
>We used to able to search the ATIS mail archives-- don't think we can do
>that any more.   Sorry I haven't been much help.
>Mark
>
>-----Original Message-----
>From: farmall-bounces at lists.antique-tractor.com
>[mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of Mark Sargent
>Sent: Sunday, September 02, 2012 6:58 PM
>To: 'Farmall/IHC mailing list'
>Subject: Re: [Farmall] M&W pump
>
>Kevin
>I bought a bearing and seal kit for my M's M & W pump from a place in
>Nebraska a few years ago-- they weren't very high tech--- Don't believe they
>had a web site.   Got the number through the list.   Got the Kit and  and
>after talking to them--they faxed me a parts diagram for the pump.    Now I
>have been no help at all--  I'll see if I kept the receipts out in the barn
>for it-- Somebody on the list pointed that way for me-- maybe they are still
>around.   I'll let you know if I find something.
>Mark
>
>-----Original Message-----
>From: farmall-bounces at lists.antique-tractor.com
>[mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of Kevin Bish
>Sent: Sunday, September 02, 2012 3:54 PM
>To: Farmall/IHC mailing list
>Subject: Re: [Farmall] M&W pump
>
>Anyone know where I can get repair parts for an M&W live hydraulic pump,
>that fits an M, or H ?
>----- Original Message -----
>From: "Kevin Bish" <krsky at windstream.net>
>To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
>Sent: Saturday, September 01, 2012 9:45 PM
>Subject: [Farmall] M&W pump
>
>
>> Have a friend that has a M&W live hydraulic pump that he is putting on 
>> his M.
>> He called and asked if I knew if there should be oil in the housing 
>> where the distributor shaft bolts on? I guess he took the little plug 
>> out to put grease in there, and seen oil.  Does anyone know if there 
>> should be oil in here, or if someone thinks the rear seal on the M&W 
>> pump is leaking? He is going to trun the engine over with the starter, 
>> and see if it is pumping hyd. oil into the housing. Thanks for any
>suggestions. Kevin.
>>
>> _______________________________________________
>> Farmall mailing list
>> http://www.antique-tractor.com/mailman/listinfo/farmall
>
>_______________________________________________
>Farmall mailing list
>http://www.antique-tractor.com/mailman/listinfo/farmall
>
>_______________________________________________
>Farmall mailing list
>http://www.antique-tractor.com/mailman/listinfo/farmall
>
>_______________________________________________
>Farmall mailing list
>http://www.antique-tractor.com/mailman/listinfo/farmall
>
>
>