[Farmall] M&W pump

[Alan]

My 1940 B has the two close together front wheels.
Picture the axle between those wheels.
Now think of the piece of iron riveted to that short axle that goes up to the turning part.
That piece is broken.
I just hit a little bump too fast when I had to dodge that car and the cast iron snapped.
The top of that part is in three pieces.
As easy as it broke my guess is I am not the first one to need one of these.
 
If it wasn't for the heavy duty wood splitter base being the first thing to hit the ground it looks like I would have some bent up tin to deal with.
Besides messing up the skin of my left leg that quick stop also showed me the tool box under the seat. Lots of cool old square nuts and bolts in there.  I also found the pin to pin the splitter in the vertical position.

It would be nice to have an original part.
 
Alan

--- On Wed, 9/5/12, richard nono <richard_nono at yahoo.com> wrote:


From: richard nono <richard_nono at yahoo.com>
Subject: Re: [Farmall] M&W pump
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Date: Wednesday, September 5, 2012, 6:18 PM


alan  what part are you looking for i might can find it for you  i live  in arkansas and there are farmall's every where here i just bought a  H farmall for $650.00 it and the bush hog too i bought a M farmall for $900.00  last year  i can find all kind of them for sale and partting out 
 

if it aint broke DONT FIX IT!!!!!


>________________________________
> From: Jim Becker <jim.becker at verizon.net>
>To: Farmall/IHC mailing list <farmall at lists.antique-tractor.com> 
>Sent: Wednesday, September 5, 2012 1:39 PM
>Subject: Re: [Farmall] M&W pump
>  
>I find it hard to believe you can't find that part.  It was used on the B, 
>C, Super C and probably others.  They hardly ever wear out.
>Jim Becker
>
>-----Original Message----- 
>From: Alan
>Sent: Wednesday, September 05, 2012 11:41 AM
>To: Farmall/IHC mailing list
>Subject: Re: [Farmall] M&W pump
>
>I did find time to call them a while ago.
>No luck. He went out to check then called me back.
>A very nice guy but no part for my Farmall B.
>I will go ahead and build one out of steel.
>A good reason to dump the stuff off my LeBlond metal lathe and fire it up.
>An 1891 lathe making a part for a 1940 Farmall.
>Priceless,,,,,
>The history guy at the LeBlond company dated it for me and he had to admit 
>mine is the oldest one known to exist. The 14th one the company built. They 
>have the 32nd one.
>Alan
>--- On Tue, 9/4/12, richard nono <richard_nono at yahoo.com> wrote:
>
>
>From: richard nono <richard_nono at yahoo.com>
>Subject: Re: [Farmall] M&W pump
>To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
>Date: Tuesday, September 4, 2012, 9:52 PM
>
>
>did you call them? did it help you any at all  Alan?
>Richard
>
>
>if it aint broke DONT FIX IT!!!!!
>
>
>>________________________________
>> From: Alan <rustaholic777 at yahoo.com>
>>To: Farmall/IHC mailing list <farmall at lists.antique-tractor.com>
>>Sent: Tuesday, September 4, 2012 6:02 PM
>>Subject: Re: [Farmall] M&W pump
>>
>>Wow, thanks.
>>Now why didn't you post that contact number when I made my Broke My Tractor 
>>post.
>>Are you in Smithville, AR ?
>>
>>--- On Mon, 9/3/12, richard nono <richard_nono at yahoo.com> wrote:
>>
>>
>>From: richard nono <richard_nono at yahoo.com>
>>Subject: Re: [Farmall] M&W pump
>>To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
>>Date: Monday, September 3, 2012, 10:40 AM
>>
>>
>>
>>
>>
>>emersons  salvage in  my home town  has new and used parts for all 
>>farmall's
>>there phone # is 870-528-3213
>>they will ship too you also
>>i dont know if they have a web site but you can call them and ask there
>>they are always  fair on there price's
>>good luck
>>richard  wheeless
>>
>>
>>>________________________________
>>> From: Mark Sargent <bucksargent at embarqmail.com>
>>>To: 'Farmall/IHC mailing list' <farmall at lists.antique-tractor.com>
>>>Sent: Sunday, September 2, 2012 6:21 PM
>>>Subject: Re: [Farmall] M&W pump
>>>
>>>Kevin
>>>I went out to the barn-- The kit I got--- was to rebuild the Behlen Power
>>>Steering unit -- not the M& W Pump.   I have had the pump off a couple 
>>>time
>>>in the past but never have rebuilt it.    The Place I ordered  the kit 
>>>for
>>>the Behlen unit from was-- "HI-LO Equipment Company of Columbus", 
>>>Columbus,
>>>Nebraska 68601.   The Phone was 402-564-3415.
>>>They may be able to help-- if someone here or Yesterday's Tractors can't.
>>>We used to able to search the ATIS mail archives-- don't think we can do
>>>that any more.   Sorry I haven't been much help.
>>>Mark
>>>
>>>-----Original Message-----
>>>From: farmall-bounces at lists.antique-tractor.com
>>>[mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of Mark 
>>>Sargent
>>>Sent: Sunday, September 02, 2012 6:58 PM
>>>To: 'Farmall/IHC mailing list'
>>>Subject: Re: [Farmall] M&W pump
>>>
>>>Kevin
>>>I bought a bearing and seal kit for my M's M & W pump from a place in
>>>Nebraska a few years ago-- they weren't very high tech--- Don't believe 
>>>they
>>>had a web site.   Got the number through the list.   Got the Kit and  and
>>>after talking to them--they faxed me a parts diagram for the pump.    Now 
>>>I
>>>have been no help at all--  I'll see if I kept the receipts out in the 
>>>barn
>>>for it-- Somebody on the list pointed that way for me-- maybe they are 
>>>still
>>>around.   I'll let you know if I find something.
>>>Mark
>>>
>>>-----Original Message-----
>>>From: farmall-bounces at lists.antique-tractor.com
>>>[mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of Kevin Bish
>>>Sent: Sunday, September 02, 2012 3:54 PM
>>>To: Farmall/IHC mailing list
>>>Subject: Re: [Farmall] M&W pump
>>>
>>>Anyone know where I can get repair parts for an M&W live hydraulic pump,
>>>that fits an M, or H ?
>>>----- Original Message -----
>>>From: "Kevin Bish" <krsky at windstream.net>
>>>To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
>>>Sent: Saturday, September 01, 2012 9:45 PM
>>>Subject: [Farmall] M&W pump
>>>
>>>
>>>> Have a friend that has a M&W live hydraulic pump that he is putting on
>>>> his M.
>>>> He called and asked if I knew if there should be oil in the housing
>>>> where the distributor shaft bolts on? I guess he took the little plug
>>>> out to put grease in there, and seen oil.  Does anyone know if there
>>>> should be oil in here, or if someone thinks the rear seal on the M&W
>>>> pump is leaking? He is going to trun the engine over with the starter,
>>>> and see if it is pumping hyd. oil into the housing. Thanks for any
>>>suggestions. Kevin.
>>>>
>>>> _______________________________________________
>>>> Farmall mailing list
>>>> http://www.antique-tractor.com/mailman/listinfo/farmall
>>>
>>>_______________________________________________
>>>Farmall mailing list
>>>http://www.antique-tractor.com/mailman/listinfo/farmall
>>>
>>>_______________________________________________
>>>Farmall mailing list
>>>http://www.antique-tractor.com/mailman/listinfo/farmall
>>>
>>>_______________________________________________
>>>Farmall mailing list
>>>http://www.antique-tractor.com/mailman/listinfo/farmall
>>>
>>>
>>>
>>_______________________________________________
>>Farmall mailing list
>>http://www.antique-tractor.com/mailman/listinfo/farmall
>>_______________________________________________
>>Farmall mailing list
>>http://www.antique-tractor.com/mailman/listinfo/farmall
>>
>>
>>
>_______________________________________________
>Farmall mailing list
>http://www.antique-tractor.com/mailman/listinfo/farmall
>_______________________________________________
>Farmall mailing list
>http://www.antique-tractor.com/mailman/listinfo/farmall 
>
>_______________________________________________
>Farmall mailing list
>http://www.antique-tractor.com/mailman/listinfo/farmall
>
>
>   
_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall