[Farmall] M&W pump

Kevin Bish krsky at windstream.net
Sun Sep 2 20:44:26 PDT 2012


Thanks Mark,
I had sold a M&W pump to friend, and we think the seals, or bearings may be 
out of it. I gave him a Behlen pump today to use, till we see what is wrong 
with the M&W pump. I was hoping someone could give me some information if 
parts are still out there for the M&W pumps. Thanks, Kevin.
----- Original Message ----- 
From: "Mark Sargent" <bucksargent at embarqmail.com>
To: "'Farmall/IHC mailing list'" <farmall at lists.antique-tractor.com>
Sent: Sunday, September 02, 2012 7:21 PM
Subject: Re: [Farmall] M&W pump


> Kevin
> I went out to the barn-- The kit I got--- was to rebuild the Behlen Power
> Steering unit -- not the M& W Pump.   I have had the pump off a couple 
> time
> in the past but never have rebuilt it.    The Place I ordered  the kit 
> for
> the Behlen unit from was-- "HI-LO Equipment Company of Columbus", 
> Columbus,
> Nebraska 68601.   The Phone was 402-564-3415.
> They may be able to help-- if someone here or Yesterday's Tractors can't.
> We used to able to search the ATIS mail archives-- don't think we can do
> that any more.   Sorry I haven't been much help.
> Mark
>
> -----Original Message-----
> From: farmall-bounces at lists.antique-tractor.com
> [mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of Mark 
> Sargent
> Sent: Sunday, September 02, 2012 6:58 PM
> To: 'Farmall/IHC mailing list'
> Subject: Re: [Farmall] M&W pump
>
> Kevin
> I bought a bearing and seal kit for my M's M & W pump from a place in
> Nebraska a few years ago-- they weren't very high tech--- Don't believe 
> they
> had a web site.   Got the number through the list.   Got the Kit and  and
> after talking to them--they faxed me a parts diagram for the pump.    Now 
> I
> have been no help at all--  I'll see if I kept the receipts out in the 
> barn
> for it-- Somebody on the list pointed that way for me-- maybe they are 
> still
> around.   I'll let you know if I find something.
> Mark
>
> -----Original Message-----
> From: farmall-bounces at lists.antique-tractor.com
> [mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of Kevin Bish
> Sent: Sunday, September 02, 2012 3:54 PM
> To: Farmall/IHC mailing list
> Subject: Re: [Farmall] M&W pump
>
> Anyone know where I can get repair parts for an M&W live hydraulic pump,
> that fits an M, or H ?
> ----- Original Message -----
> From: "Kevin Bish" <krsky at windstream.net>
> To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
> Sent: Saturday, September 01, 2012 9:45 PM
> Subject: [Farmall] M&W pump
>
>
>> Have a friend that has a M&W live hydraulic pump that he is putting on
>> his M.
>> He called and asked if I knew if there should be oil in the housing
>> where the distributor shaft bolts on? I guess he took the little plug
>> out to put grease in there, and seen oil.  Does anyone know if there
>> should be oil in here, or if someone thinks the rear seal on the M&W
>> pump is leaking? He is going to trun the engine over with the starter,
>> and see if it is pumping hyd. oil into the housing. Thanks for any
> suggestions. Kevin.
>>
>> _______________________________________________
>> Farmall mailing list
>> http://www.antique-tractor.com/mailman/listinfo/farmall
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
> 





More information about the AT mailing list