[Farmall] M&W pump

Mark Sargent bucksargent at embarqmail.com
Sun Sep 2 16:21:47 PDT 2012


Kevin  
I went out to the barn-- The kit I got--- was to rebuild the Behlen Power
Steering unit -- not the M& W Pump.   I have had the pump off a couple time
in the past but never have rebuilt it.    The Place I ordered  the kit  for
the Behlen unit from was-- "HI-LO Equipment Company of Columbus", Columbus,
Nebraska 68601.   The Phone was 402-564-3415. 
They may be able to help-- if someone here or Yesterday's Tractors can't.
We used to able to search the ATIS mail archives-- don't think we can do
that any more.   Sorry I haven't been much help.
Mark

-----Original Message-----
From: farmall-bounces at lists.antique-tractor.com
[mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of Mark Sargent
Sent: Sunday, September 02, 2012 6:58 PM
To: 'Farmall/IHC mailing list'
Subject: Re: [Farmall] M&W pump

Kevin
I bought a bearing and seal kit for my M's M & W pump from a place in
Nebraska a few years ago-- they weren't very high tech--- Don't believe they
had a web site.   Got the number through the list.   Got the Kit and  and
after talking to them--they faxed me a parts diagram for the pump.    Now I
have been no help at all--  I'll see if I kept the receipts out in the barn
for it-- Somebody on the list pointed that way for me-- maybe they are still
around.   I'll let you know if I find something.
Mark

-----Original Message-----
From: farmall-bounces at lists.antique-tractor.com
[mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of Kevin Bish
Sent: Sunday, September 02, 2012 3:54 PM
To: Farmall/IHC mailing list
Subject: Re: [Farmall] M&W pump

Anyone know where I can get repair parts for an M&W live hydraulic pump,
that fits an M, or H ?
----- Original Message -----
From: "Kevin Bish" <krsky at windstream.net>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Saturday, September 01, 2012 9:45 PM
Subject: [Farmall] M&W pump


> Have a friend that has a M&W live hydraulic pump that he is putting on 
> his M.
> He called and asked if I knew if there should be oil in the housing 
> where the distributor shaft bolts on? I guess he took the little plug 
> out to put grease in there, and seen oil.  Does anyone know if there 
> should be oil in here, or if someone thinks the rear seal on the M&W 
> pump is leaking? He is going to trun the engine over with the starter, 
> and see if it is pumping hyd. oil into the housing. Thanks for any
suggestions. Kevin.
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall

_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall

_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall




More information about the AT mailing list