[AT] MF 135 Hydraulic Q.

[charlie hill]

David,  Assuming your lift it operating normally, the height you can lift 
the implement is
a function of where the lift pins are located on the implement,  in this 
case your bush hog.
I'm running a bush hog that is really made for a larger tractor than I have 
it on and had the same
problem.    I fixed it by relocating the lift pins lower on the frame, down 
about 3" above the mower deck.
That lets the lift go all the way down and gives you maximum lift.

Charlie

-----Original Message----- 
From: David Trompower
Sent: Wednesday, November 14, 2012 10:00 PM
To: at at lists.antique-tractor.com
Subject: [AT] MF 135 Hydraulic Q.




Hello Every buddy,
I 'm wondering  how  high off the ground,  a MF 135  with three point lift, 
will / should,  lift a  brush hog?
  B/C  I  am feeling mine is not  lifting it high enough.

If it is determined that I'm correct,  then  I need your help discovering 
why, and how to repair this trouble .
Thanks


_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at