[AT] Chain saw sharpening
Dick Day
ddss at telebeep.com
Sat Mar 31 19:55:32 PDT 2012
Jason, thanks for such a quick reply.
The specs I included were pulled off the following site...
http://www.toolbarn.com/worx-wa0159.html
It's hard to tell from the website you gave me, but is that sharpener
anything like this one at Northern?
http://www.northerntool.com/shop/tools/product_200308557_200308557?cm_ven=natural&cm_cat=netconcepts&cm_pla=&cm_ite=
I saw one like this in use once and it looked simple enough that even I
should be able to use it :)
--------------------------------------------------
From: "Jason" <dejoodster at gmail.com>
Sent: Saturday, March 31, 2012 9:27 PM
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Subject: Re: [AT] Chain saw sharpening
> Wow $18 to sharpen. Been awhile since I've had to get that done.
>
> Are you sure it's 63 links? This chain is 62 links for an 18" bar and it's
> less than $18 for a new chain.
> http://www.baileysonline.com/itemdetail.asp?item=WPL+30LP62&catID=
>
> Anyway the key to manual sharpening is to touch them up regularly. Keep a
> good sharp edge and don't wait until it's dull and sawing powder, because
> then you'll need to take it in to have it professionally sharpened. This
> would be a decent basic set of files to hand sharpen.
> http://www.baileysonline.com/itemdetail.asp?item=ORF+38276&catID=
>
>
> Jason DeJoode
> Eagan, MN
>
>
>
>
> ----- Original Message -----
> From: "Dick Day" <ddss at telebeep.com>
> To: "ATIS" <at at lists.antique-tractor.com>
> Sent: Saturday, March 31, 2012 8:49 PM
> Subject: [AT] Chain saw sharpening
>
>
>> Greetings.
>>
>> I can get the chain sharpened locally for $18. I've seen manual file
>> sets
>> that mount on the bar and allow you to sharpen the chain. I've also seen
>> electric, both 12-volt and 110. The reviews I've read about the
>> electric
>> ones are quick to point out that the cheap ones don't last. I cannot
>> justify $150 and up for a decent one, so I figured I would try my hand at
>> manual sharpening.
>>
>> I have an 18" electric Worx chain saw and love it. The specifics of the
>> chain are gauge=.05 length=18" links=63 pitch=3/8"
>>
>> Can anyone suggest what I should get to sharpen the chain?
>>
>> Thanks
>>
>> Dick Day
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1913 / Virus Database: 2114/4907 - Release Date: 03/31/12
>
More information about the AT
mailing list