[AT] From "Farm Collector" - Sprayon 710 PDRP

[Mark Greer]

It stays tacky for a short time. After a few weeks, it is more like a soft beeswax consistency.
Mark


----- Original Message -----
I found it online and a local pipe wholesale outlet we do some business with 
is a dealer for it.  They have a "green" version of it that is veggie oil 
based and dries hard but can be washed off with soap and a pressure washer. 
Apparently the mineral oil version of it stays tacky.

Charlie

-----Original Message----- 
From: charlie hill
Sent: Wednesday, February 29, 2012 12:05 PM
To: Antique tractor email discussion group
Subject: Re: [AT] From "Farm Collector" - using copper tubing for fuel 
lines.

Getting this back around to antique tractors, that stuff should be great for
spraying plow points once they are cleaned up nice.

Charlie

-----Original Message----- 
From: Mark Greer
Sent: Wednesday, February 29, 2012 11:45 AM
To: Antique tractor email discussion group
Subject: Re: [AT] From "Farm Collector" - using copper tubing for fuel
lines.

I believe it is sold only through Sprayon distributors and not through
Sherwin Williams distribution channels.
Mark

----- Original Message -----
Thanks Mark.  We buy a lot of Sherwin Williams products.  I have their
industrial coating catalog right beside me but I don't think that product is
in it.  I'll check into it.  I'd like to try that on some stuff.

-----Original Message----- 
From: Mark Greer
Sent: Wednesday, February 29, 2012 9:31 AM
To: Antique tractor email discussion group
Subject: Re: [AT] From "Farm Collector" - using copper tubing for fuel
lines.

What does work exceptionally well is an industrial product called P.D.R.P.
from Sprayon, which is an industrial products division of Sherwin Williams.
It is also known as Sprayon 710 and is available as an aerosol or in bulk 1,
5 (I think), and 55 gallon sizes. It is applied wet and dries to a waxy
amber colored film, similar to the old Cosmoline coating the military used.
P.D.R.P. was developed for use on ship decks to preserve metal surfaces from
salt spray. I have sprayed this stuff on all sorts of things that I wanted
to keep from rusting over the years and it works. It can be thinned with
mineral spirits and removed with the same plus a healthy application of
elbow grease.
Mark