[AT] OT- hour meter

[charlie hill]

That's what I would have done and probably what a rental place would do.

Charlie

-----Original Message----- 
From: Larry Goss
Sent: Friday, March 02, 2012 1:43 PM
To: Antique tractor email discussion group
Subject: Re: [AT] OT- hour meter

Well, since I own the stump grinder, I took all the items off it that made 
it look like a rental unit.  So it has no instruction manual case, no 
tach-hour meter, etc.

Larry

----- Original Message -----
From: "charlie hill" <charliehill at embarqmail.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Friday, March 2, 2012 11:26:44 AM
Subject: Re: [AT] OT- hour meter

Larry or you could do as I suspect I would have, throw away the Veermeer rip
off battery unit and re-wire the thing with my own battery, hour meter and
tach.

Charlie

-----Original Message----- 
From: Larry Goss
Sent: Friday, March 02, 2012 10:42 AM
To: Antique tractor email discussion group
Subject: Re: [AT] OT- hour meter

FWIW, I have several hour-meter's on small engines, Mike.  One I have on a
PK has been mounted to the instrument panel for 7 or 8 years, and still
gives the rpm's and elapsed hours.  It's one of those $30 jobs that is sold
through small engine repair shops, etc.  I had one on a Vermeer stump
grinder that I bought at Home Depot when they were upgrading their rental
units.  The battery went dead on it, so I contacted the Vermeer dealer to
get a new battery (and for instructions for how to get the unit open).
Answer -- the whole unit is designed as a throw-away.  When the battery goes
dead, you buy a new tach/hour-meter.  If you go that route (El Cheapo model)
be aware that there are two models available depending on whether your
ignition is timed with a cam/magneto that only fires on the compression
stroke, or if the plug fires on every crank revolution.

Larry

----- Original Message -----
From: "Mike M" <meulenms at gmx.com>
To: "at" <at at lists.antique-tractor.com>
Sent: Thursday, March 1, 2012 10:27:40 PM
Subject: [AT] OT- hour meter

Hi all,
I bought a new wood splitter the other day and would like to install a
simple hour meter on it for maintenance tracking. I see some digital ones,
but thats really fancier than I need and I question their durability. Any
suggestions?
Thanks,
Mike M
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at