[AT] JD 2130 hydraulic problem

[charlie hill]

Thanks Bruce

Charlie

-----Original Message----- 
From: Bruce & Bertie Mahr
Sent: Sunday, June 24, 2012 11:14 PM
To: Antique tractor email discussion group
Subject: Re: [AT] JD 2130 hydraulic problem

I am not familiar with the 2130, but most of the Deere's have a seal on both
sides of the load and depth shaft that is where he is talking about the oil
leaking from.

Bruce Mahr

-----Original Message----- 
From: charlie hill
Sent: Sunday, June 24, 2012 8:14 PM
To: Antique tractor email discussion group
Subject: [AT] JD 2130 hydraulic problem



The message below is from a friend.  If anyone has an idea what could be
causing the problem on this
tractor let me know and I'll pass it along.

I don't know a think about a JD 2130.  If it was my D-14 I'd say the
hydraulic hose to the ram that pushes the
lift rock shaft was busted but I don't know if the JD works that way or not.

Thanks
Charlie




>
> I got a problem on my 2130 John Deere.  It is losing hydraulic oil.  We
> checked yesterday and the to mounting pins (appear to be two ends of the
> same rod) were the stationary end of the draft (lift) arms attach to the
> tractor have oil leaking out around the holes they fit through!  I fear
> that
> means something is broke inside.  I could probably put some type of
> packing
> in to slow it down but if it is broke inside it don't matter much cause
> all
> that will do is puddle it up inside where it should be dry.
>

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at