[AT] JD 2130 hydraulic problem

Cecil R Bearden crbearden at copper.net
Sun Jun 24 20:05:04 PDT 2012


Also, I ran my 4010 with these leaking for over a year until we got time 
to replace them....  Just keep the trans full..

Cecil in OKla


On 6/24/2012 8:14 PM, charlie hill wrote:
>
> The message below is from a friend.  If anyone has an idea what could be
> causing the problem on this
> tractor let me know and I'll pass it along.
>
> I don't know a think about a JD 2130.  If it was my D-14 I'd say the
> hydraulic hose to the ram that pushes the
> lift rock shaft was busted but I don't know if the JD works that way or not.
>
> Thanks
> Charlie
>
>
>
>
>> I got a problem on my 2130 John Deere.  It is losing hydraulic oil.  We
>> checked yesterday and the to mounting pins (appear to be two ends of the
>> same rod) were the stationary end of the draft (lift) arms attach to the
>> tractor have oil leaking out around the holes they fit through!  I fear
>> that
>> means something is broke inside.  I could probably put some type of
>> packing
>> in to slow it down but if it is broke inside it don't matter much cause
>> all
>> that will do is puddle it up inside where it should be dry.
>>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at





More information about the AT mailing list