[AT] tractor pull results

Thu Jun 21 18:23:25 PDT 2012

Tyler,

I'm not interested in selling mine, but they seem to show up from time to time out in your area.  Keep checking the ytmag website, all the good tractors always seem to be in Iowa, MN and WI.

Enjoy, Joe

Sent from my iPhone just for you

On Jun 21, 2012, at 5:21 PM, Tyler Juranek <tylerpolkaman at gmail.com> wrote:

> Hi Joe,
> I am located in Iowa.
> My grandfather would like one on Steel, but he said that rubber is ok.
> Where are you located?
> Also, are you interested in selling the tractor?
> If not, that's ok.
> Thanks,
> Tyler
> 
> On 6/21/12, Joe Hazewinkel <jahaze at aol.com> wrote:
>> Tyler,
>> 
>> List is slow anyway, I don't think anyone will mind.  Mine will be on full
>> steel once I get a chance to swap out the old cut offs that are on the back
>> now.  I have a set of factory dual steel wheels that I really want to get
>> put in, but so far haven't found the time.  I'd love to get it done, but
>> it's getting lower on the list.  Where are you located?  I knew where there
>> was a nice restored one for sale in Michigan last year.
>> 
>> Enjoy, Joe
>> 
>> Sent from my iPhone just for you
>> 
>> On Jun 20, 2012, at 9:23 PM, Tyler Juranek <tylerpolkaman at gmail.com> wrote:
>> 
>>> Hello Joe,
>>> No I do not have any specific questions, my grandfather is looking for
>>> one, since it was the first tractor he drove.
>>> Is it on steel or rubber?
>>> If you want, you can email me privately at tylerpolkaman at gmail.com so
>>> we don't clutter the list.
>>> Regards,
>>> Tyler
>>> 
>>> On 6/20/12, Joe Hazewinkel <jahaze at aol.com> wrote:
>>>> Tyler,
>>>> 
>>>> I have a Hart Parr 70, do you have a specific question?  I'm sure there's
>>>> a
>>>> few others on the list who have one as well.
>>>> 
>>>> Enjoy,  Joe
>>>> 
>>>> Sent from my iPhone just for you
>>>> 
>>>> On Jun 20, 2012, at 11:37 AM, Tyler Juranek <tylerpolkaman at gmail.com>
>>>> wrote:
>>>> 
>>>>> Hi Dan,
>>>>> This Oliver 70 you have, is it one of those Hart Par Models?
>>>>> If so, could you please email me off list at tylerpolkaman at gmail.com
>>>>> Thank you,
>>>>> Tyler
>>>>> 
>>>>> On 6/19/12, Dan Folske <dfolske at nccray.net> wrote:
>>>>>> took 4 of my Olivers to an antique tractor pull at our county fair
>>>>>> this
>>>>>> weekend.
>>>>>> 
>>>>>> The Super 55 pulled well but I discovered that not enough gas is
>>>>>> getting
>>>>>> into or through the carb when it is working hard. Every time we worked
>>>>>> it
>>>>>> with the governor wide open for more than 45 to 50 seconds it would
>>>>>> start
>>>>>> sputtering like it was running out of gas and then die. Wait a few
>>>>>> seconds
>>>>>> and it would fire right back up. Even cultivating trees around home
>>>>>> I'm
>>>>>> usually only running half throttle and don't have any problems.
>>>>>> 
>>>>>> The 70 was a total embarrassment. It didn't even wiggle the sled set
>>>>>> for
>>>>>> the
>>>>>> 
>>>>>> 5000 # farm stock class. I bought the tractor recently knowing that
>>>>>> low
>>>>>> gear
>>>>>> 
>>>>>> was out and that it wasn't running as perfectly smooth as it should.
>>>>>> It
>>>>>> has
>>>>>> 
>>>>>> on old loader with vertical hydraulic cylinders mounted to the
>>>>>> implement
>>>>>> cross pipes for the main lift and a trip bucket.
>>>>>> 
>>>>>> The 1850 weighed in at 10,850 and the 1950 weighed in at 13,800 with a
>>>>>> 707
>>>>>> Leon loader on it. Both pulled very well.
>>>>>> 
>>>>>> Hopefully by next year I'll have the 70 ready to pull like it should
>>>>>> and
>>>>>> maybe take my CC Case and Farmall Regular as well.
>>>>>> 
>>>>>> For me the star of the show was a Super 88 Oliver diesel which pulled
>>>>>> in
>>>>>> the
>>>>>> 
>>>>>> super stock class.
>>>>>> 
>>>>>> Dan Folske
>>>>>> 
>>>>>> Tractors: 8 Olivers, 3 Cases, a Farmall Regular, a 10-20, a WD-9, a
>>>>>> Hydro
>>>>>> 186, a 1086, and an IH 2500B Hydro, a JD B, and a 2 JD D's. Most
>>>>>> run, some are used almost every day, some are future projects and a
>>>>>> few
>>>>>> are
>>>>>> 
>>>>>> parts tractors.
>>>>>> 
>>>>>> IH Trucks: 5 KB-5s, a K-3, a KB-2, a KB-1, a 1986 S1955 single axle
>>>>>> semi
>>>>>> tractor with a DTA-466 and a 10 speed.  I'm dealing on a KB-6 and
>>>>>> trying
>>>>>> to
>>>>>> 
>>>>>> talk a friend into selling me her KB-3. She used to haul grain with it
>>>>>> when
>>>>>> 
>>>>>> she and her husband were first married. I think I've got her talked
>>>>>> into
>>>>>> letting me have it at a price we've already agreed on if I can get it
>>>>>> running so she can drive it around town a few times.
>>>>>> 
>>>>>> _______________________________________________
>>>>>> AT mailing list
>>>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>>>> 
>>>>> 
>>>>> 
>>>>> --
>>>>> Check out my youtube channel, and spread the word!
>>>>> http://www.youtube.com/tylerthetechy/
>>>>> _______________________________________________
>>>>> AT mailing list
>>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>> 
>>>> _______________________________________________
>>>> AT mailing list
>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>> 
>>> 
>>> 
>>> --
>>> Check out my youtube channel, and spread the word!
>>> http://www.youtube.com/tylerthetechy/
>>> _______________________________________________
>>> AT mailing list
>>> http://www.antique-tractor.com/mailman/listinfo/at
>> 
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>> 
> 
> 
> -- 
> Check out my youtube channel, and spread the word!
> http://www.youtube.com/tylerthetechy/
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at