[AT] B&S coil

[Don Bowen]

On 7/1/2012 11:16 AM, Dean VP wrote:
> It takes a pretty good ohm meter to measure the resistance of a coil.  It might be
> somewhere from less than 1 ohm to 2 or three ohms. Inexpensive ohm meters do not measure
> low resistance very well or very accurately.  Also it is important to zero the meter first
> before measuring by shorting the leads on the lowest ohm measuring scale.

I have a very good meter and it is reading near zero.  My brother has 
another coil and I will test that one.

-- 
Don Bowen           KI6DIU
http://www.braingarage.com/Dons/Travels/journal/Journal.html