[AT] tractor rebuild kits

[Louis]

I am a dealer for A&I, Tisco, and several different aftermarket companies.
I use and sell major engine parts from three of my vendors.  I have never
had an issue with any of the parts.  The only issue one time was that the
machinist didn't give enough clearance in the bore for a set of new pistons,
this was even after he was told what type of clearance was needed.

This past year I rebuilt both an Allis CA and B.  Same engines.  One tractor
is still used for work and the other is just for putting around.  Both run
great with the parts that were used from my vendors.

I have basic kits that just have pistons, rings, liners, and gaskets all the
way up to complete kits with bearings, valve train parts.  I am also able to
get individual parts.  Let's say you need one intake valve, I can get that
for you.

If you would like, I can give you a price.  Contact me at
sales at srstractor.com

Lou Spiegelberg

-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of
Recentjester at aol.com
Sent: Wednesday, January 04, 2012 7:29 AM
To: at at lists.antique-tractor.com
Subject: [AT] tractor rebuild kits


Those liner and piston kits for around 500.00 that are widely available on  
line. Are they good quality or just cheap import junk? Interested in allis  
chalmers B ones. Also what does a single bottom plow go for and can it be 
rigged  up n a draw bar? Obviously I am no farmer grin
_______________________________________________
AT mailing list http://www.antique-tractor.com/mailman/listinfo/at