[AT] OT, Reverse Camera

Dick Day ddss at telebeep.com
Sun Jan 1 09:49:42 PST 2012 

THAT is what started this whole project :)  The Lincoln dealer loaned my 
wife a new one to use while hers was in getting new tires. The loaner had 
the reverse camera.  She "really" liked that. She never asks for anything. 
Ever. This was the first time in 43 years of marriage that she gave me the 
impression she's really like, what I would call, a luxury item.

--------------------------------------------------
From: "charlie hill" <charliehill at embarqmail.com>
Sent: Sunday, January 01, 2012 7:31 AM
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Subject: Re: [AT] OT, Reverse Camera

> I've seen those advertised Dick but never actually seen one in use. 
> Don't
> some cars have a similar system built in now with the reverse screen in 
> the
> built in navigation screen?
>
> Charlie
>
> -----Original Message----- 
> From: Dick Day
> Sent: Saturday, December 31, 2011 11:24 PM
> To: Antique tractor email discussion group
> Subject: Re: [AT] OT, Reverse Camera
>
> Charlie, both cars have the towing package, so I will start there.
>
> This is a different sort of setup. Rather than having a small GPS-like
> screen that sticks to the windshield with a suction cup, the display is
> actually embedded in a large mirror that fits snugly over the existing
> mirror.  When the camera is not activated, the screen is "almost" as
> reflective as a mirror. When the camera kicks in, it's a 4x7 inch display.
> The actual assembly is just over 10 inches wide, just about the same as 
> the
> original mirror.
>
> It was priced about the same as the 3.5" suction cup display units, < $80.
>
> If anyone is interested, I'll re-post and let you know how it works.
>
> Thanks again for the advice.
>
> Dick
>
> --------------------------------------------------
> From: "charlie hill" <charliehill at embarqmail.com>
> Sent: Saturday, December 31, 2011 9:37 PM
> To: "Antique tractor email discussion group" 
> <at at lists.antique-tractor.com>
> Subject: Re: [AT] OT, Reverse Camera
>
>> Dick I realized after I wrote that you mentioned it being a Nav' in the
>> first post.  I guess the wiring on them is similar to the Expeditions but
>> I
>> don't know a thing about them other than it should have a towing harness
>> connector in the back somewhere as someone else mentioned.   I know what
>> you
>> mean about getting under a dash.  My spine is still in fairly good shape
>> but
>> until they make zoom lens glasses I can't do a thing under the dash and 
>> if
>> I
>> tried I'd have to pull the front seat first.   If you can find a kid 
>> about
>> 23 years old that works in a car audio place he can put it in before you
>> can
>> spell cat.
>> The problem is finding one you trust.
>>
>> Charlie
>>
>> -----Original Message----- 
>> From: Dick Day
>> Sent: Saturday, December 31, 2011 5:06 PM
>> To: Antique tractor email discussion group
>> Subject: Re: [AT] OT, Reverse Camera
>>
>> Hey guys, I really appreciate the help!
>>
>> This is going in my wife's 2003 Lincoln Navigator.  Once that is done,
>> I'll
>> do our 2007 Navigator.
>>
>> Again, anything I can do to shorten my time under the dash would be
>> appreciated.  I enjoy doing this sort of thing but arthritis in the spine
>> has taken its toll :)
>>
>> Dick
>>
>> --------------------------------------------------
>> From: "charlie hill" <charliehill at embarqmail.com>
>> Sent: Saturday, December 31, 2011 3:02 PM
>> To: "Antique tractor email discussion group"
>> <at at lists.antique-tractor.com>
>> Subject: Re: [AT] OT, Reverse Camera
>>
>>> Dick,  what brand, model and year car/truck are you putting it on.  That
>>> might help.  Someone might know the specifics.
>>>
>>> Charlie
>>>
>>> -----Original Message----- 
>>> From: Alan Nadeau
>>> Sent: Saturday, December 31, 2011 12:59 PM
>>> To: Antique tractor email discussion group
>>> Subject: Re: [AT] OT, Reverse Camera
>>>
>>> Dick,
>>>
>>> You're overlooking something.  The reverse lights are at the back of the
>>> car
>>> but they have to get switched somewhere that is convenient.  At one time
>>> the
>>> RL switch was on the transmission.  Now it is probably somewhere on the
>>> steering column under the dash.  I your new rig, since it is most likely
>>> all
>>> electronic(no mechanical shift linkage) it could be anywhere or even a
>>> sub-circuit off whatever triggers reverse in the transmission.  At any
>>> rate
>>> there is a wire in there somewhere that either feeds the RL on the
>>> vehicle
>>> or triggers a relay which feeds the RL.  It is also possible that the RL
>>> are
>>> switched on the ground side which would require a relay that would 
>>> switch
>>> the camera on when it (the relay) was grounded.  Not hard to do either
>>> way
>>> but the first step is to visit your dealer and ask to look over a wiring
>>> schematic.  If you can get your hands on a service manual for a few
>>> minutes
>>> you can find out which side of the circuit is getting switched as well 
>>> as
>>> both the circuit number (will be imprinted on the wire every few inches
>>> or
>>> at the connections at the least), the color code of the wires involved
>>> and
>>> a
>>> "component locator"  which will tell you where to look for things.  It 
>>> is
>>> also possible, and very easy to rig one manual switch which will allow
>>> the
>>> camera to be triggered manually, automatically, or left off at all 
>>> times.
>>>
>>> Here's a link to a wiring diagram for the switching.
>>> http://www.snowplowing-contractors.com/alan_reverse_lights.html
>>>
>>> If the system is switched on the hot side follow the left hand drawing
>>> with
>>> the camera wired on the wire(blue) marked "new lights".  The camera
>>> shouldn't draw much power so that drawing should work.  If the camera
>>> doesn't have it's own supply connection, and does draw all it's power 
>>> off
>>> the trigger lead it might be best to wire it using the right hand 
>>> drawing
>>> where the only current added to the RL circuit is the tiny amount used 
>>> to
>>> trigger the relay.
>>>
>>>
>>> ----- Original Message ----- 
>>> From: "Dick Day" <ddss at telebeep.com>
>>> To: "Antique tractor email discussion group"
>>> <at at lists.antique-tractor.com>
>>> Sent: Saturday, December 31, 2011 11:06 AM
>>> Subject: Re: [AT] Waaayyyy OT
>>>
>>>
>>>> That's what I may end up doing.   The reverse lights wire will provide
>>>> the
>>>> easiest place to find what I need, but they are at the back of the car
>>>> and
>>>> the connection that ties to it is from the display which is at the 
>>>> dash.
>>>>
>>>> It's a shame cars don't have a punch-down block (used in phone/network
>>>> wiring).  It appears that everything is done with individual harnesses.
>>>>
>>>> Looks like I will run another line next to the shielded video cable 
>>>> from
>>>> the
>>>> back of the car to the front.  I'll make sure it's got an in-line fuse
>>>> that's easy to get to.
>>>>
>>>> Thanks for all of the help.
>>>>
>>>> Dick
>>>>
>>>> --------------------------------------------------
>>>> From: "charlie hill" <charliehill at embarqmail.com>
>>>> Sent: Saturday, December 31, 2011 9:52 AM
>>>> To: "Antique tractor email discussion group"
>>>> <at at lists.antique-tractor.com>
>>>> Subject: Re: [AT] Waaayyyy OT
>>>>
>>>>> Ok I understand now.   How much power does the camera draw?  You may
>>>>> well
>>>>> be
>>>>> able to simply tap the hot wire to one of the back up lights.   I 
>>>>> think
>>>>> if
>>>>> it was me that's what I'd try.  The worst that can happen is a blown
>>>>> fuse.
>>>>> You could tap both back up light circuits, run the wires to a central
>>>>> point
>>>>> and tie them together.  That would split the load between the two.
>>>>>
>>>>> -----Original Message----- 
>>>>> From: Dick Day
>>>>> Sent: Saturday, December 31, 2011 10:23 AM
>>>>> To: Antique tractor email discussion group
>>>>> Subject: Re: [AT] Waaayyyy OT
>>>>>
>>>>> Thanks. What I actually need is a lead that only becomes energized 
>>>>> when
>>>>> the
>>>>> car is put into reverse.  The reverse fuse circuit is bundled with
>>>>> several
>>>>> other circuits, so unless I can find a lead somewhere under the dash
>>>>> that
>>>>> handles just the reverse lights, I'm pretty sure I'll end up running 
>>>>> an
>>>>> extra line. Not a big deal, was just hoping to avoid running a 12v 
>>>>> wire
>>>>> from
>>>>> front to back.
>>>>>
>>>>> Thanks
>>>>>
>>>>> Dick
>>>>>
>>>>> --------------------------------------------------
>>>>> From: "charlie hill" <charliehill at embarqmail.com>
>>>>> Sent: Saturday, December 31, 2011 9:04 AM
>>>>> To: "Antique tractor email discussion group"
>>>>> <at at lists.antique-tractor.com>
>>>>> Subject: Re: [AT] Waaayyyy OT
>>>>>
>>>>>> Lots of new vehicles also have fuse boxes in the engine compartment.
>>>>>> You
>>>>>> might find an extra accessory socket there if you look around.   Also
>>>>>> you
>>>>>> could buy a fuse holder and run a wire directly from the battery
>>>>>> terminal
>>>>>> with the fuse inline near the battery.   What ever you do don't mess
>>>>>> with
>>>>>> a
>>>>>> pink wire unless you want to replace your airbags after they deploy.
>>>>>> For
>>>>>> safety sake, disconnect the battery before you do any wiring.
>>>>>>
>>>>>> Charlie
>>>>>>
>>>>>> -----Original Message----- 
>>>>>> From: Dick Day
>>>>>> Sent: Friday, December 30, 2011 2:21 PM
>>>>>> To: Antique tractor email discussion group
>>>>>> Subject: Re: [AT] Waaayyyy OT
>>>>>>
>>>>>> Dan, thanks. I was hoping that was the case. I'll grab a test light
>>>>>> and
>>>>>> see.
>>>>>> My back just does not take to that awkward bending like it used to. 
>>>>>> I
>>>>>> wish
>>>>>> they could mount those fuse/breaker boxes someplace that was easier 
>>>>>> to
>>>>>> get
>>>>>> to ;)
>>>>>>
>>>>>> Dick
>>>>>>
>>>>>> --------------------------------------------------
>>>>>> From: "Dan Glass" <dglass at numail.org>
>>>>>> Sent: Friday, December 30, 2011 5:06 AM
>>>>>> To: "Antique tractor email discussion group"
>>>>>> <at at lists.antique-tractor.com>
>>>>>> Subject: Re: [AT] Waaayyyy OT
>>>>>>
>>>>>>> I am not sure on this particular vehicle but on most there is a fuse
>>>>>>> box
>>>>>>> under the dash between the steering column and the door.  It should
>>>>>>> even
>>>>>>> be labeled as the back up lights.  That would be a good place to tap
>>>>>>> in.
>>>>>>>
>>>>>>> On 12/29/2011 10:13 PM, Dick Day wrote:
>>>>>>>> I am about to install a rear-view camera in our '03 Nav.   The
>>>>>>>> display/Monitor at the dash has a lead to connect to the reverse
>>>>>>>> light
>>>>>>>> in
>>>>>>>> the rear of the car. This is what supplies power to the camera when
>>>>>>>> it's
>>>>>>>> in
>>>>>>>> reverse.
>>>>>>>>
>>>>>>>> Does anyone know if there is a place at the dash that I could
>>>>>>>> connect
>>>>>>>> to
>>>>>>>> for
>>>>>>>> this?  Or do I need to run an extra power cable to the rear?
>>>>>>>>
>>>>>>>> If this goes well, I'll add one to our '06 as well.
>>>>>>>>
>>>>>>>> This is such a diverse group of people, I am just curious if anyone
>>>>>>>> has
>>>>>>>> done
>>>>>>>> this before.
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>>
>>>>>>>> Dick
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> AT mailing list
>>>>>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>>>>> _______________________________________________
>>>>>>> AT mailing list
>>>>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>>>>>
>>>>>>>
>>>>>>> -----
>>>>>>> No virus found in this message.
>>>>>>> Checked by AVG - www.avg.com
>>>>>>> Version: 2012.0.1901 / Virus Database: 2109/4711 - Release Date:
>>>>>>> 12/29/11
>>>>>>>
>>>>>> _______________________________________________
>>>>>> AT mailing list
>>>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>>>>
>>>>>> _______________________________________________
>>>>>> AT mailing list
>>>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>>>>
>>>>>>
>>>>>> -----
>>>>>> No virus found in this message.
>>>>>> Checked by AVG - www.avg.com
>>>>>> Version: 2012.0.1901 / Virus Database: 2109/4714 - Release Date:
>>>>>> 12/31/11
>>>>>>
>>>>> _______________________________________________
>>>>> AT mailing list
>>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>>>
>>>>> _______________________________________________
>>>>> AT mailing list
>>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>>>
>>>>>
>>>>> -----
>>>>> No virus found in this message.
>>>>> Checked by AVG - www.avg.com
>>>>> Version: 2012.0.1901 / Virus Database: 2109/4714 - Release Date:
>>>>> 12/31/11
>>>>>
>>>> _______________________________________________
>>>> AT mailing list
>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>>
>>>>
>>>> -----
>>>> No virus found in this message.
>>>> Checked by AVG - www.avg.com
>>>> Version: 2012.0.1901 / Virus Database: 2109/4714 - Release Date:
>>>> 12/31/11
>>>>
>>>
>>> _______________________________________________
>>> AT mailing list
>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>
>>> _______________________________________________
>>> AT mailing list
>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>
>>>
>>> -----
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 2012.0.1901 / Virus Database: 2109/4714 - Release Date: 
>>> 12/31/11
>>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2012.0.1901 / Virus Database: 2109/4715 - Release Date: 12/31/11
>>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1901 / Virus Database: 2109/4715 - Release Date: 12/31/11
>

More information about the AT mailing list