[AT] From "Farm Collector" - using copper tubing for fuel lines.

[Larry Goss]

:-)  Your description reminds me of the atmosphere around the parking lot in back of Lehman's Hardware in Kidron, Mike.  Every piece of un-painted horse-drawn equipment at their monthly auction has been drenched in that mixture.

Larry

----- Original Message -----
From: "Mike Sloane" <mikesloane at verizon.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, February 29, 2012 5:40:00 AM
Subject: Re: [AT] From "Farm Collector" - using copper tubing for fuel lines.

I am told that a good "poor man's undercoating" from the "old days" was 
a 50/50 mix of kerosene and diesel oil applied liberally over the entire 
underside of the vehicle. Spraying was best, but a brush would work too. 
The downside is that your vehicle will be a little smelly for a few 
days, especially if you have any holes in the floorboards.

I can tell you what doesn't work: at the town garage, the guys use a 
Hotsy steam cleaner on the undersides of the trucks after spreading 
salt. It may help a little, but the steel still rusts badly after on a 
few years.

Mike

On 2/28/2012 9:22 PM, Roy Morgan wrote:
>
> On Feb 28, 2012, at 11:53 AM, Steve W. wrote:
>
>> ... NY salt will eat a steel line in 3-4 years.
>
> Steve,
>
> Uh oh.  Here near Ithaca (just a couple of miles from the Cargil salt
> mine where they  mine two million tons of it a year!) we have a Ford
> F-250.  I have been wondering what coating/treatment I can use to keep
> the thing from rusting out.  I see lots of rust on the undersides of
> the thing - and it does not leak any oil or other fluids to coat the
> bottom!
>
> Roy
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at