[AT] Shop ceiling
Mike 1countryguy
mdo_1 at hotmail.com
Wed Sep 28 04:48:05 PDT 2011
Interesting site don. I lucked into seconds "wayne dalton" garage door panels for part of my machine shed (shop) area. A rare find and not availailable any more. They were being resold as new at sales. Thus, now they test runs are all ground up immediately. What a waste. It saved me installing the perlins (false wall) for the insulation and I was able to use 4 ft wide rolls. R value around 30 for winters in north central ohio. The shop heat is in floor.
> Date: Wed, 28 Sep 2011 06:23:34 -0500
> From: don.bowen at earthlink.net
> To: at at lists.antique-tractor.com
> Subject: Re: [AT] Shop ceiling
>
> On 9/27/2011 9:17 PM, Don Bowen wrote:
> > I was talking with my builder friend this evening about the next step in
> > my shop. It is a pole building that I put up false walls between the 5
> > by 5 poles. The walls are 2X4 on 24" centers with roll insulation
> > between then covered with 7/16" OSB. For the ceiling I put 2X6 joists
> > between the trusses and was planning on covering with the same OSB. THe
> > problem soon became obvious. The building is not square, I have 6
> > lighting outlets, 4 switched plugs for task lighting, and 4 hanging
> > outlets, all would need holes through the OSB so each sheet may be
> > lifted two or three times to a 9' 6" ceiling. I had designed a panel
> > lift for my engine hoist.
> >
> > Then my friend said that many here use tin. He said I could get No 2
> > tin and he and I could put it in place in an afternoon. Then I will use
> > blown in cellulose insulation. It will make a nice warm shop for these
> > mild Ozark winters.
> >
> > Any comments on this idea?
> >
> I forgot to add pictures.
> False wall studs in place between poles.
> http://www.braingarage.com/Dons/Travels/journal/February%2011/images/north%20false%20wall.jpg
>
> Insulation between studs.
> http://www.braingarage.com/Dons/Travels/journal/February%2011/images/ne%20corner.jpg
>
> Shop wall with OSB covering. A sink will go in this corner
> http://www.braingarage.com/Dons/Travels/journal/February%2011/images/ne%20corner%20done.jpg
>
> Shop ceiling as it is now.
> http://www.braingarage.com/Dons/Travels/journal/images/shop%20ceiling.jpg
>
> --
> Don Bowen KI6DIU
> http://www.braingarage.com/Dons/Travels/journal/Journal.html
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
More information about the AT
mailing list