[AT] winter projects?

[Mike Sloane]

Another good thought. I tried that. I also "cracked" the connection at 
the carburetor inlet, and gas poured out. I even ran a tiny drill 
through the cap vent holes, just to be sure. Thanks anyway!

Mike

On 11/24/2011 11:08 AM, Phil Auten wrote:
> Mike,
> When it begins to fail, remove the gas cap. May be a plugged vent.
>
> Been there, done that,
> Phil
>
> At 09:39 AM 11/24/2011, you wrote:
>
>
>> On 11/24/2011 9:51 AM, john hall wrote:
>>> Mike, have you tried a new coil? Sounds like it my be failing when it is
>>> hot.
>> I wish it was as simple as the coil. I have a good spark when the engine
>> quits, and, just to make sure, I have changed out the coil for a brand
>> new one. I also have a Pertronix electronic module in place of the
>> points/condenser (and I even swapped that out for another known working
>> module). But thanks for the thought!
>>
>> Mike
>>>