[Farmall] cub cadet steering upgrade

[E. John Puckett]

My suggestion was regarding the vertical shaft on the front wheels, 
rather than the steering box.

On 11/24/2011 8:48 AM, E. John Puckett wrote:
> I do no know about a Cadet, but I have used these on a cub that I
> installed a loader on, and they made it much easier to steer.
> http://www.mcmaster.com/#needle-roller-thrust-bearings/=f2nq89
> I used a bearing and 2 thin spacers on each side.  My cub was the old
> style with set screws holding the steering arms on so I had to grind a
> little off the top of the housing when I put it together, but it was
> well worth the effort.
>
> On 11/24/2011 7:17 AM, john hall wrote:
>> I've seen a couple places you can order a thrust bearing kit for the steering on Cub Cadets. Supposedly it makes the steering much easier. Anyone here ever done this upgrade? We've got 3 here I'm thinking about installing it on.
>>
>> John Hall
>> _______________________________________________
>> Farmall mailing list
>> http://www.antique-tractor.com/mailman/listinfo/farmall
>>
>>
>>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>
>
>