[Farmall] plug wires

[Kevin Weinstock]

Thanks Darrell,

I've used these before but I recall someone once telling me that a factory 
molded plug wire was better. That these could be troublesome. Since I 
haven't changed any plug wires in years, I found it odd that this type was 
sold as the first choice at a dealership. But I'll install these then. 
Thanks!

----- Original Message ----- 
From: "Darrell Ratliff" <dbigdog at columbus.rr.com>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Friday, June 03, 2011 4:24 PM
Subject: Re: [Farmall] plug wires


> Kevin - I believe you will find that is what we all use.  Just lay the old
> wires out next to the new ones and cut them to length.  The end caps 
> install
> easily.  It is not a difficult job.
>
> From: Kevin Weinstock
> Sent: Friday, June 03, 2011 5:00 PM
> To: farmall at lists.antique-tractor.com
> Subject: [Farmall] plug wires
>
> Folks,
>
> I went to my local IH dealer for a set of plug wires for my 48 H. What he
> sold me was a generic set of wires that have to be cut to length and have
> those little metal clips that get inserted into the cut end. He claims
> that's what they use too. I bought them but am hesitant to use them. Is
> there a place to buy a good set of plug wires or do you folks have good 
> luck
> using these? Kevin
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>