[AT] .40 main bearings allis B

Recentjester at aol.com Recentjester at aol.com
Mon Jul 11 16:59:28 PDT 2011


thanks for your search'in. yeah the machinist should have  checked. The 
shop owner is on vacation so when he gets back I can see what can  be done.
 
 
In a message dated 7/11/2011 5:23:48 P.M. Central Daylight Time,  
jtchall at nc.rr.com writes:

I'd ask  for a refund or a replacement crank. Any machinist with half a 
brain 
won't  machine engine components to a dimension that parts cannot be bought 
 
for.

John Hall

----- Original Message ----- 
From:  "Louis" <louis at kellnet.com>
To: "'Antique tractor email discussion  group'" 
<at at lists.antique-tractor.com>
Sent: Sunday, July 10,  2011 11:46 PM
Subject: Re: [AT] .40 main bearings allis B


>I  am amazed at how many times a machine shop will turn a crank, before
>  checking to see what bearings are available.  I get calls all the  time
> at my shop from people who had there cranks turned and now they  can't
> find the proper bearings.  Some of these people get upset  with me, and I
> tell them they should take their issue up with the  machinist and not me.
>
> I checked with 4 of my vendors.   The smallest undersize mains are .030".
> I can get .060" under rod  bearing, but I know this does not help you.
>
> If I were you, I  would go back to the machinist and ask him if he looked
> to see if  .040" under bearing were available before he turned the crank.
> If he  says he did, ask him to produce some.  If he says he didn't tell
>  him the crank needs to welded and turned to standard, on his  dime.
>
> Just my thoughts.
>
> Louis
>
>  -----Original Message-----
> From:  at-bounces at lists.antique-tractor.com
>  [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of
>  Recentjester at aol.com
> Sent: Sunday, July 10, 2011 9:36 AM
> To:  at at lists.antique-tractor.com
> Subject: [AT] .40 main bearings allis  B
>
>
> I am finally rebuilding my Allis B But....they  turned the  crank .040
> under. I need bearings.... didn't see any  on the net anybody have a
> source?  _______________________________________________
> AT mailing list  http://www.antique-tractor.com/mailman/listinfo/at
>
>
>
>  _______________________________________________
> AT mailing  list
> http://www.antique-tractor.com/mailman/listinfo/at  

_______________________________________________
AT mailing  list
http://www.antique-tractor.com/mailman/listinfo/at




More information about the AT mailing list