[AT] hello?

[charlie hill]

Gene, don't expect to get that lucky everyday!

Charlie

-----Original Message----- 
From: Gene Dotson
Sent: Tuesday, January 25, 2011 7:32 PM
To: Antique tractor email discussion group
Subject: Re: [AT] hello?

    John'
     Nope, not at NAPA, Advance, TSC, local lawnmower hop or at nearest CIH
dealer. It is a 17 MM metric bearing. Ingersoll dealer at Celina, 40 miles
away has 2 of them and told me they were also used on the mowers. Well gosh
I have a Case mower in the barn I never have used and it has 2 of these
bearings. Took about 15 minutes to get back in service.

                Gene

P.S.  For what it is worth, Our local NAPA store is not the super parts
stores some of yopu seem to have.


----- Original Message ----- 
From: "John" <johnwidener at sbcglobal.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Tuesday, January 25, 2011 5:13 PM
Subject: Re: [AT] hello?


> Might check with Napa, they can get allot of different idlers for mowers.
>
>
> ----- Original Message ----- 
> From: "Gene Dotson" <gdotsly at watchtv.net>
> To: "Antique tractor email discussion group"
> <at at lists.antique-tractor.com>
> Sent: Tuesday, January 25, 2011 4:47 PM
> Subject: Re: [AT] hello?
>
>
>>    Nope, not down. Just nobody has anything to report.
>>
>>    Keeping busy clearing the snow. Just finished clearing my airstrip
>> Sunday with the little Case 222 and snowblower when I lost a bearing in
>> the
>> belt idler pulley. Looked 4 different places yeaterday for a pulley and
>> could not find one. Discovered today the same pulley was used on the
>> mowers.
>> I have a mower deck I have never used and scavenged one from it. Fast
>> repair
>> and no cost and I still have one more for a spare. Back in business in
>> less
>> than 1/2 hour.
>>
>>            Gene
>>
>
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at