[AT] Talking about shops/sheds

[Al Jones]

John,

How high is your door/ceiling?

I do want to have a small room in the corner with a sink, toilet, and room for a desk/tool storage.  My notion is then to keep all my tractor books, old Red Power's and related stuff there.

I know that whatever I build will probably be too small!  I do also hope to add a lean-to shed around the ends and one side, where I can store stuff that needs a roof over its head but doesn't necessarily have to be in an enclosed building.

Thanks,
Al


-----Original Message-----
>From: John & Jan Paur <johnjanpaur2 at directcon.net>
>Sent: Feb 14, 2011 8:49 PM
>To: Antique tractor email discussion group <at at lists.antique-tractor.com>
>Subject: Re: [AT] Talking about shops/sheds
>
>Al, Ten years ago I was exactly where you are, building a new house and 
>shop/tractor shed.  I built a 36x60 frame building with text. plywood 
>(T-111) exterior.  The shop portion is 20x36 and has concrete floor and a 
>wood stove for heat.  The tractor shed is the remainder - 40x36.  It has a 
>dirt floor.  Some thoughts.  The 20x36 shop is fine and about the right 
>size.  I can tear down a tractor and rebuild it OK in that space.  It does 
>have a 6x18 beam across that supports two chain hoists for pulling/hoisting 
>engines, transmissions etc.  In one corner is a small room with a sink and 
>urinal.  It has 220v to support a welder.  The tractor shed part is TOO 
>SMALL. I park tractors along each wall and have about a 12ft. alley.  To do 
>it over, I would make it 40ft. wide to more easily get tractors in and out 
>and probably 80 or 100ft. long, giving me a 60 or 80ft tractor shed.  The 
>only drawback to the dirt floor is that the tractors get very dusty quickly. 
>Just my thoughts.  John
>
>
>----- Original Message ----- 
>From: "Al Jones" <farmallsupera at earthlink.net>
>To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
>Sent: Monday, February 14, 2011 3:59 PM
>Subject: [AT] Talking about shops/sheds
>
>
>> Not to go into too much detail, my wife and I hope to build a house soon.
>>
>> Along with it, I want a real, concrete floored, maybe with a woodstove, 
>> place to work on my relics out of the rain, shop.  A good friend/colleague 
>> and I were talking today, he's a licensed electrician and has done 
>> masonry/construction most of his life before he started teaching.  We got 
>> on the subject of shops and I asked him what was the "best" in terms of 
>> cost.
>>
>> He's a big fan of cinderblock construction.  I have always leaned towards 
>> pole barns, mostly from all of those beautiful Morton Buildings ads in 
>> Successful Farming magazine I have looked at since I was a kid....he said 
>> by the time I bought the metal for the siding, I could spend about the 
>> same amount for cinderblocks.
>>
>> So I know this has been hashed and re-hashed in some way or another, but 
>> what's the "best?"  Pole barn, masonry, or what?  I want this to be my 
>> "forever" shop, and want it to last.  I know it won't be big enough, etc. 
>> etc. etc.  BTW I'm thinking about something like a 30x50 or 30x60, with 
>> part of it being bona-fide shop and the rest storage/machinery parking.  I 
>> want at least a 12' high door, for "real" farm equipment as well as 
>> antiques, 14' if I can afford it. What kind of cost/square foot to build, 
>> etc?
>>
>> One thing I am thinking on is pouring the floor only for the actual 
>> "shop," (about 30x30)and having a wall separating the rest from the "shop" 
>> and then gravel for the rest of the floor as a way to cut costs. 
>> Thoughts?
>>
>> This is a bit rambling I know, but I'd like to  get some thoughts and 
>> Ideas.  The #1 consideration is cost, but the building must be durable. 
>> The whole thing may be a pipe dream but if we build a home as we plan, 
>> this may be my only chance....
>>
>> Have at it,
>> Al
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 10.0.1204 / Virus Database: 1435/3443 - Release Date: 02/14/11
>> 
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at