[Farmall] Gear Oil

[Milo]

Thanks John, I'll contact you off list.
Thanks again to you and everyone that chimed in with info.

-- 
Peace
Milo
milosmachineshed.com



On 12/1/2011 9:17 PM, john hall wrote:
> Milo, mine is 99% complete and running, kind of pricey for a parts machine!
> I've seen some guys on Smokestack that had a few that might would sell
> parts, you'll just have to do a search on there to find them. Don't know how
> much you know about the early industrials but they could be configured
> numerous ways, so finding parts machines could get interesting! Contact me
> off list if you are possibly interested in another tractor.
>
> John Hall
>
> ----- Original Message -----
> From: "Milo"<milo at milosmachineshed.com>
> To: "Farmall/IHC mailing list"<farmall at lists.antique-tractor.com>
> Sent: Thursday, December 01, 2011 7:32 PM
> Subject: Re: [Farmall] Gear Oil
>
>
>> On 12/1/2011 5:30 PM, john hall wrote:
>>> We use straight 140W in the old stuff. I bought something even heavier
>>> for
>>> my Titan but that is a much more pimitive transmission. I think the
>>> thicker
>>> stuff doesn't leak as bad around all the worn shafts/bushings.
>>>
>>> You don't want another I-20 for your collection do you?
>>>
>>> John Hall
>>>
>>> ----- Original Message -----
>>> From: "Milo"<milo at milosmachineshed.com>
>>> To: "Farmall/IHC mailing list"<farmall at lists.antique-tractor.com>
>>> Sent: Thursday, December 01, 2011 8:20 AM
>>> Subject: [Farmall] Gear Oil
>>>
>>>
>>>> What are you folks using for gear lube in the older units?
>>>> I'm restoring a 1928 Russell Road Grader that uses a 10-20 (I-20)
>>>> McCormick Deering for power.
>>>> I'm using the cast iron "tub" from a 1934 10-20, as the original one on
>>>> the grader was broken
>>>> at the wheel hub on the right rear.
>>>>
>>>> Also using the bull gear and some of the transmission gears from the 34.
>>>>
>>>> -- 
>>>> Peace
>>>> Milo
>>>> milosmachineshed.com
>>>>
>>>> _______________________________________________
>>>> Farmall mailing list
>>>> http://www.antique-tractor.com/mailman/listinfo/farmall
>>>>
>>> _______________________________________________
>>> Farmall mailing list
>>> http://www.antique-tractor.com/mailman/listinfo/farmall
>>>
>>>
>>> -----
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 2012.0.1873 / Virus Database: 2102/4651 - Release Date: 12/01/11
>>>
>>>
>> Thanks for all of the replies folks. Think I'll try to locate some heavy
>> (140w) oil.
>>
>> John Hall, I would indeed be interested another I-20 (really need carb /
>> intake / exhaust manifold).
>>
>> -- 
>> Peace
>> Milo
>> milosmachineshed.com
>>
>> _______________________________________________
>> Farmall mailing list
>> http://www.antique-tractor.com/mailman/listinfo/farmall
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1873 / Virus Database: 2102/4651 - Release Date: 12/01/11
>
>