[Farmall] Farmall pto

[Mike Sloane]

The U-joints need to be at 90° to each other to avoid chattering.

Mike

On 9/9/2010 6:51 PM, johng wrote:
> I would go after the U-Joints before I considered swapping out a PTO....Or
> just accept that the PTO - to Drawbar geometry is the culprit.
>
> If the U-Joints are okay (tried on another tractor) then maybe.
>
> I have a 400 and a 350 utility - they both chatter with the baler.  Any
> U-Joint that goes beyond a certain angle will chatter.
>
> John
>