[Farmall] Transmission Oil Change - Wrench Question

[Ed and Mary Gilliland]

Tim,

I made a wrench at my shop.  If you have anything that is close to a 3/4 
inch square rod, you can make that work.  Also, a 3/4 inch drive socket 
extension will work  Hope this helps.  Don't buy one unless you have to as 
this is one tool that you will very seldom use.

Ed Gilliland

----- Original Message ----- 
From: "Tim Savelle" <tim.savelle at gmail.com>
To: <farmall at lists.antique-tractor.com>
Sent: Sunday, May 23, 2010 6:32 AM
Subject: [Farmall] Transmission Oil Change - Wrench Question


>I need to change the transmission/differential in the 1949 "H" I recently
> purchased.  The filler plug is a large barrel bung-looking plug, but the
> wrench access is inset into the plug rather than protruding out....which
> means I can't use a wrench on it.  The square hole is 3/4".  I don't have 
> a
> socket or pull handle that size.  Anybody got a suggestion before I go out
> and buy an expensive tool for this?
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall