[Farmall] Transmission Oil Change - Wrench Question

[Ed Greany]

That's a good idea. At first I forgot that all nuts are not 6-sided. A couple 4-sided nuts on a bolt locked to each other should do the trick nicely. Good hint. Thanks.
 
Ed

--- On Sun, 5/23/10, mstrating <mstrating at essex1.com> wrote:


From: mstrating <mstrating at essex1.com>
Subject: Re: [Farmall] Transmission Oil Change - Wrench Question
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Date: Sunday, May 23, 2010, 5:49 AM


I use a bolt with a double nut on the end that will fit in the plug.



Tim Savelle wrote:
> I need to change the transmission/differential in the 1949 "H" I recently
> purchased.  The filler plug is a large barrel bung-looking plug, but the
> wrench access is inset into the plug rather than protruding out....which
> means I can't use a wrench on it.  The square hole is 3/4".  I don't have a
> socket or pull handle that size.  Anybody got a suggestion before I go out
> and buy an expensive tool for this?
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>
>   

_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall