[Farmall] Transmission Oil Change - Wrench Question

[ebony51 at frontiernet.net]

You could grind the head of a bolt to that size and then square off the other end so you can put a wrench on it.  Or simply purchase an 3/4" adaptor for an existing smaller socket wrench you might have. Either will work and I have done both.

Larry Hardesty
----- Original Message -----
From: "Tim Savelle" <tim.savelle at gmail.com>
To: farmall at lists.antique-tractor.com
Sent: Sunday, May 23, 2010 6:32:58 AM
Subject: [Farmall] Transmission Oil Change - Wrench Question

I need to change the transmission/differential in the 1949 "H" I recently
purchased.  The filler plug is a large barrel bung-looking plug, but the
wrench access is inset into the plug rather than protruding out....which
means I can't use a wrench on it.  The square hole is 3/4".  I don't have a
socket or pull handle that size.  Anybody got a suggestion before I go out
and buy an expensive tool for this?
_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall