[AT] Spam> I beam weight

Alan Nadeau ajnadeau1 at myfairpoint.net
Wed May 12 17:48:39 PDT 2010


Don, the closest I can find on the beams is an S20x75(lb/ft) but that should 
only be 6 3/8" wide on the flange.  There's is no close match for the second 
one.  The third is probably a W10x26 but it is dimensioned at 5 3/4"w x 10 
3/8"d.  The d-plate is 10.2 lbs per sq. ft.  What is the thickness of the 4 
x 4 angle?


----- Original Message ----- 
From: "Don Bowen" <don.bowen at earthlink.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, May 12, 2010 8:01 PM
Subject: [AT] Spam> I beam weight


> My head is zapped from a day at the dentist and moving heavy tools.  So
> could someone tell me the weight per foot for some steel.  The first is
> an I-beam 8 1/4", by 19 7/8", of 5/8" material.  The second I-beam is 5
> 1/4" by 7 1/4" of 1/4" material.  The third I-beam is 5" by 10 1/2" of
> 1/4" material.
>
> The diamond plates are 6' by 10' of 1/4 material.  The angle iron is 4"
> by 4".  I think there is a piece of iron 3/8" by 16 1/2".
>
> -- 
> Don Bowen           KI6DIU
> http://www.braingarage.com/Dons/Travels/journal/Journal.html
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.437 / Virus Database: 271.1.1/2869 - Release Date: 05/12/10 
06:26:00




More information about the AT mailing list