[AT] Ford 6000

jahaze at aol.com jahaze at aol.com
Sat Jul 24 16:42:13 PDT 2010


How do you check if a pump is timed correctly? 

Enjoy, Joe



-----Original Message-----
From: K7jdj at aol.com
To: at at lists.antique-tractor.com
Sent: Sat, Jul 24, 2010 6:11 pm
Subject: Re: [AT] Ford 6000



In a message dated 7/24/2010 1:20:47 P.M. Pacific Daylight Time,  
jahaze at aol.com writes:

No  smoke, ever, even with either, it just won't  fire.

It should fire with ether.  If the engine is turning over fast enough,  in 
time, it will fire on ether unless it has very low compression. I would 
agree  that the diesel in the oil is caused by a bad seal on the injection pump  

shaft.  I have had a diesel engines start and run with very serious  
problems, cracked heads, blocks, and broken pistons, rings etc. but the engines  

were in time, both valve and injection pump.

Gary
Renton, WA  
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at




More information about the AT mailing list