[Farmall] cub j4 magneto

[Mike Sloane]

I agree with John. I replaced mine about 15 years ago (I thought the 
coil was bad, but it turned out to be another problem), and I don't 
recall any difficulty at the time. This was on a '48 Cub, and I am still 
using the same point/condenser/rotor. The rings are worn, but the 
tractor still fires right up and does a day's work (I only use it with a 
22 sickle bar to trim around ponds and along steep banks a couple of 
times a month during the summer months).

Mike

On 7/1/2010 10:14 PM, john hall wrote:
> Been a while since I opened one of them up but it should only be a couple
> screws and probably 2 wires. I'd replace points and condensor while I was at
> it. Check the rotor and cap as well. Shop around for the best price, I use
> Standard Magneto for all my mag parts.
>
> John Hall
>
> ----- Original Message -----
> From: "WALTER AVERY"<waltavery at embarqmail.com>
> To:<farmall at lists.antique-tractor.com>
> Sent: Thursday, July 01, 2010 5:11 PM
> Subject: [Farmall] cub j4 magneto
>
>
>>
>> how easy is it to replace the coil?
>> _______________________________________________
>> Farmall mailing list
>> http://www.antique-tractor.com/mailman/listinfo/farmall
>>
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>